th 350 ultra bell

richie 2 · 12-23-2019, 02:28 AM

r they worth the time & investment ? tks

jmcarter · 12-23-2019, 11:49 AM

With what combination? Makes a difference...

Jim Kaekel · 12-23-2019, 12:46 PM

If your car has a tendency to break bellhousings, yes. I would recommend taking the trans case to a competent machinist so it can be cut and the bell housing be registered so that it can be installed properly.

e vassar · 12-24-2019, 12:04 AM

I wouldn't pull my trans out just to put one on , but if it's already out,its a no brainer,,considering the cost.

MR DERBY CITY · 12-24-2019, 12:22 AM

There is absolutely NO need to install a ultra bell on your tranny...UNLESS you are cracking the case. After you have cracked ONE case,...it’s a lifesaver....of course my ole buddy Captain Jack cracked 2 cases before he bought the bell.....

richie 2 · 12-24-2019, 01:14 AM

thankyou !!!

Mike Pearson · 12-24-2019, 10:37 AM

Its the best way to go if you are in a class that requires a guard on the flywheel/ Bell housing. I have done several on Powerglides and they work real well.

Dano · 12-25-2019, 11:02 AM

If you use a Bell that is easily removed and sent back for recert and a good quality Trans blanket, you'll save much $$ and frustration.....Worked for me!!

Eman · 12-25-2019, 12:22 PM

They are nice and strong but they are also thicker and bigger. That might be a factor in a car with a stock floorpan transmission tunnel. I have a 3rd gen F body and the drivers side is very tight to the bell.

richie 2 · 12-25-2019, 01:27 PM

the trans must come apart to install?

12-23-2019, 02:28 AM	#1
richie 2 Senior Member Join Date: Feb 2009 Posts: 971 Likes: 424 Liked 205 Times in 93 Posts	th 350 ultra bell r they worth the time & investment ? tks

12-23-2019, 11:49 AM	#2
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,295 Likes: 2,373 Liked 3,174 Times in 971 Posts	Re: th 350 ultra bell With what combination? Makes a difference... __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

12-23-2019, 12:46 PM	#3
Jim Kaekel VIP Member Join Date: Jul 2002 Location: Michigan Posts: 1,227 Likes: 133 Liked 530 Times in 108 Posts	Re: th 350 ultra bell If your car has a tendency to break bellhousings, yes. I would recommend taking the trans case to a competent machinist so it can be cut and the bell housing be registered so that it can be installed properly. __________________ Jim Kaekel 3836 STK

12-24-2019, 12:04 AM	#4
e vassar Member Join Date: Jul 2015 Posts: 380 Likes: 67 Liked 271 Times in 107 Posts	Re: th 350 ultra bell I wouldn't pull my trans out just to put one on , but if it's already out,its a no brainer,,considering the cost.

12-24-2019, 12:22 AM	#5
MR DERBY CITY VIP Member Join Date: Feb 2014 Location: Derby City, USA Posts: 3,636 Likes: 1,083 Liked 7,924 Times in 1,516 Posts	Re: th 350 ultra bell There is absolutely NO need to install a ultra bell on your tranny...UNLESS you are cracking the case. After you have cracked ONE case,...it’s a lifesaver....of course my ole buddy Captain Jack cracked 2 cases before he bought the bell.....

12-24-2019, 01:14 AM	#6
richie 2 Senior Member Join Date: Feb 2009 Posts: 971 Likes: 424 Liked 205 Times in 93 Posts	Re: th 350 ultra bell thankyou !!!

12-24-2019, 10:37 AM	#7
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,444 Likes: 613 Liked 1,917 Times in 575 Posts	Re: th 350 ultra bell Its the best way to go if you are in a class that requires a guard on the flywheel/ Bell housing. I have done several on Powerglides and they work real well. __________________ Mike Pearson 2485 SS

12-25-2019, 11:02 AM	#8
Dano Member Join Date: Oct 2019 Location: Hurricane, Utah Posts: 156 Likes: 36 Liked 52 Times in 32 Posts	Re: th 350 ultra bell If you use a Bell that is easily removed and sent back for recert and a good quality Trans blanket, you'll save much $$ and frustration.....Worked for me!!

12-25-2019, 12:22 PM	#9
Eman Member Join Date: May 2014 Location: E TN Posts: 473 Likes: 16 Liked 133 Times in 76 Posts	Re: th 350 ultra bell They are nice and strong but they are also thicker and bigger. That might be a factor in a car with a stock floorpan transmission tunnel. I have a 3rd gen F body and the drivers side is very tight to the bell.

12-25-2019, 01:27 PM	#10
richie 2 Senior Member Join Date: Feb 2009 Posts: 971 Likes: 424 Liked 205 Times in 93 Posts	Re: th 350 ultra bell the trans must come apart to install?