68 ford cylinder head flow numbers

Capri · 11-29-2019, 10:29 PM

LOL @ 219 with 289 heads................... I will say no more than that.

Jddj · 11-29-2019, 10:34 PM

Mark I will give you a call tomorrow thanks.

Jddj · 11-29-2019, 10:42 PM

Capri if that is all they will do, then that is it. This is the kind of information I am needing to make a decision. Let us not forget that they started at 154 so that is a good improvement. I would love to hear some better numbers but?

Capri · 11-30-2019, 10:14 PM

Key words being "289 heads" Kip had "special" 289 heads..............

HP HUNTER · 12-01-2019, 09:36 AM

Quote:

Originally Posted by Jddj

Capri if that is all they will do, then that is it. This is the kind of information I am needing to make a decision. Let us not forget that they started at 154 so that is a good improvement. I would love to hear some better numbers but?

Heres the flow sheets on Kips 289 heads. Tested on a SF 600 sealed 4.00 bore @ 28 inches. I also have a (289) flow test from another well know Super Stock head porter as well peaking @ 215 CFM.

HawkBrosMav · 12-16-2019, 11:37 AM

Quote:

Originally Posted by HP HUNTER

Heres the flow sheets on Kips 289 heads. Tested on a SF 600 sealed 4.00 bore @ 28 inches. I also have a (289) flow test from another well know Super Stock head porter as well peaking @ 215 CFM.

I will tell you that my brother worked a lot with Kip when putting together his 289 combo a few years back. Straight from Kip's mouth his quickest ET 289 heads only flowed 195ish.. I can't remember at what lift he said that was at, but he said he had a lot of heads he did that flowed bigger numbers but none we as fast as that particular set.. there is WAY more to having a better head that straight flow numbers. It's an easy barometer to know if your in the ball game but just because you can get a head to peak out 20 cfm higher at it's best doesn't make it a better head that the lower flow one...

HP HUNTER · 12-16-2019, 08:26 PM

Not sure what Kip told your brother, but I can assure you Kips last record setting engine had the heads in the second flow sheet I posted. Your brother should know Kip worked out of my and my former partners shop the last years of his life. Verified flow although isn't everything, but on a sorted out car such as a Super Stock or Stock you can bet more flow through the intake tract almost always equals more HP from what I've seen. If you think 217 is high you surely don't want to get into what 520 283 Super Stock head flows. 195 ish @ 400 lift..........

HP HUNTER · 12-01-2019, 10:10 AM

Quote:

Originally Posted by Capri

LOL @ 219 with 289 heads................... I will say no more than that.

I stand corrected peak flow was 217 not 219 @ 28 inches

Jddj · 12-01-2019, 06:44 PM

I have a little hope after seeing these numbers, I wonder what/whose cam was installed?

Jddj · 12-07-2019, 06:48 PM

Is anyone up to this post?

11-29-2019, 10:29 PM	#1
Capri Member Join Date: Apr 2004 Posts: 171 Likes: 0 Liked 27 Times in 14 Posts	Re: 68 ford cylinder head flow numbers LOL @ 219 with 289 heads................... I will say no more than that.

11-29-2019, 10:34 PM	#2
Jddj Junior Member Join Date: Jan 2019 Location: Vandalia Ohio Posts: 15 Likes: 12 Liked 2 Times in 2 Posts	Re: 68 ford cylinder head flow numbers Mark I will give you a call tomorrow thanks.

11-29-2019, 10:42 PM	#3
Jddj Junior Member Join Date: Jan 2019 Location: Vandalia Ohio Posts: 15 Likes: 12 Liked 2 Times in 2 Posts	Re: 68 ford cylinder head flow numbers Capri if that is all they will do, then that is it. This is the kind of information I am needing to make a decision. Let us not forget that they started at 154 so that is a good improvement. I would love to hear some better numbers but?

11-30-2019, 10:14 PM	#4
Capri Member Join Date: Apr 2004 Posts: 171 Likes: 0 Liked 27 Times in 14 Posts	Re: 68 ford cylinder head flow numbers Key words being "289 heads" Kip had "special" 289 heads..............

12-16-2019, 08:26 PM	#7
HP HUNTER Senior Member Join Date: Feb 2012 Location: Colorado Springs Colorado/Thousand Oaks Ca Posts: 656 Likes: 82 Liked 372 Times in 129 Posts	Re: 68 ford cylinder head flow numbers Not sure what Kip told your brother, but I can assure you Kips last record setting engine had the heads in the second flow sheet I posted. Your brother should know Kip worked out of my and my former partners shop the last years of his life. Verified flow although isn't everything, but on a sorted out car such as a Super Stock or Stock you can bet more flow through the intake tract almost always equals more HP from what I've seen. If you think 217 is high you surely don't want to get into what 520 283 Super Stock head flows. 195 ish @ 400 lift.......... Last edited by HP HUNTER; 12-17-2019 at 10:28 AM.

12-01-2019, 06:44 PM	#9
Jddj Junior Member Join Date: Jan 2019 Location: Vandalia Ohio Posts: 15 Likes: 12 Liked 2 Times in 2 Posts	Re: 68 ford cylinder head flow numbers I have a little hope after seeing these numbers, I wonder what/whose cam was installed?

12-07-2019, 06:48 PM	#10
Jddj Junior Member Join Date: Jan 2019 Location: Vandalia Ohio Posts: 15 Likes: 12 Liked 2 Times in 2 Posts	Re: 68 ford cylinder head flow numbers iron vs 1399 AFR Is anyone up to this post?