|
|
![]() |
#1 |
VIP Member
Join Date: Jun 2007
Location: from Vancouver BC Canada, now in Nova Scotia
Posts: 1,311
Likes: 317
Liked 1,104 Times in 302 Posts
|
![]()
My mistake, Rich, I mixed up the names of the features of the Dexter axles, it has NevRAdjust trailer brakes, they call the wheel bearings "EZLube", they have a grease nipple under each dust cap so you can pump grease into the spindle, which is drilled so the grease goes into the inner bearing, and pushes the old grease out towards the dust cap, hopefully without pushing grease past the inner seals.
As for the Lucas Red N Tacky grease I have, it is a red Lithium based grease with good rating (GC-LB), so I am hoping it should work well for the bearings.
__________________
NHRA 6390 STK M/S 85 Mustang |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2005
Location: Nashville N.C.
Posts: 506
Likes: 4
Liked 101 Times in 27 Posts
|
![]()
If you do a little research you will find out that "mixing" brands and types of grease is absolutely NOT RECOMMENDED !!!!! Just a note of extreme caution.
__________________
NHRA AND IHRA STOCK ELIMINATOR 2772 |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Jun 2006
Posts: 3,420
Likes: 529
Liked 333 Times in 180 Posts
|
![]()
X 2!!!!!!!!
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Sep 2007
Location: Henderson, NV
Posts: 583
Likes: 8
Liked 54 Times in 27 Posts
|
![]()
If you download the Dexter hubs-drums-bearings manual, it has recommended greases in it. They use lithium complex grease. Some other types of greases are sodium or aluminum complex.
|
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Apr 2002
Location: Coarsegold, CA
Posts: 1,016
Likes: 57
Liked 320 Times in 102 Posts
|
![]()
When they first started installing disc brakes from the factory there was a special Hi-Temp Disc Brake Moly Wheel Bearing grease...
I guess that I've been using it on every wheel bearing that I have packed in the last 50 years with good results.... Boat trailers excepted..
__________________
Bob Mulry 7516 STK A & M Motorsports |
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,733
Likes: 2,799
Liked 2,484 Times in 697 Posts
|
![]()
My son Jon builds and sells trailers......He will not use ANYTHING
but Dexter Axles Bearings Suspension on the trailers he sells. He replaces a lot of Chinese Crap every week from other manufacturers for people traveling thru our little town to Vegas or further West. Yes Dexter is a bit more money......But.
__________________
John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 07-04-2019 at 05:34 PM. |
![]() |
![]() |
![]() |
|
|