Locked out distributor advance question

[1320racer]

Originally Posted by Coleydog

I always use one very light spring on the advance. Engine starts at a small degree then flings out after 500 rpm to full advance.

This^^^ I would never recommend a locked out distributor when using a stock or stock type distributor. I’ve been running my distributors with 18-20 degrees mechanical advance and all in by 2000 rpm for 25 years. The reward is no hard starting, no kickbacks, no broken flexplate teeth and no broken starter drives. Spins over like the plugs are out.

[Mark Yacavone]

Originally Posted by 1320racer

This^^^ I would never recommend a locked out distributor when using a stock or stock type distributor. I’ve been running my distributors with 18-20 degrees mechanical advance and all in by 2000 rpm for 25 years. The reward is no hard starting, no kickbacks, no broken flexplate teeth and no broken starter drives. Spins over like the plugs are out.

We class racers use an MSD timing control with fixed distributor. It'll take 15* or so out for starting. Also , we class racers sometimes use it to retard the timing in high gear.

[MR DERBY CITY]

Originally Posted by Mark Yacavone

We class racers use an MSD timing control with fixed distributor. It'll take 15* or so out for starting. Also , we class racers sometimes use it to retard the timing in high gear.

This is a perfect example why 1319.5 E.D. Needs to hang out in the .90 neighborhoods....

[Mark Yacavone]

Originally Posted by MR DERBY CITY

This is a perfect example why 1319.5 E.D. Needs to hang out in the .90 neighborhoods....

Like the name... I call him YB E.D.