Drag pac intakes

Brian Oakes · 03-12-2019, 10:59 AM

Ok, on drag pac intakes,don't the bolts go straight down from the top like a ford intake. They DO not go in on a angle like a chevy. and don't tell me the holes are not welded up either.there were a few at the Baby Gators like this and there was 1 correct one for sure and Tech was informed and nothing was done.

Jim Hanig · 03-12-2019, 11:10 AM

standard nhra, bet they diddnt even go look at them.

Jason · 03-12-2019, 04:24 PM

Make a separate lane for Stock-S/S cars during tech and things like this can be found.

J.R. Haddad · 03-12-2019, 04:50 PM

Jason, while in theory that might sound reasonable, the question would
be who would be in those lanes looking at the cars, and has NHRA
invested in the S/SS education that would be needed to know what
to look for? J.R.

gsa612 · 03-12-2019, 06:23 PM

It may be a "superseded" part # for the intake and heads...lol. gsa612

GTS340 · 03-12-2019, 06:43 PM

V10 ?

john corcoran jr · 03-12-2019, 06:45 PM

Brian,
What class and engine was in the car? On the original Drag Pac motors the bolts did come in from the top. I know the second version of the 426 and the supercharged motors are a different animal. I didn't look close enough at the newer motors to remember how they mounted but the later N/A intake is different than the earlier ones.

Jason · 03-12-2019, 06:56 PM

Quote:

Originally Posted by J.R. Haddad

Jason, while in theory that might sound reasonable, the question would
be who would be in those lanes looking at the cars, and has NHRA
invested in the S/SS education that would be needed to know what
to look for? J.R.

In each division there are techmen who are more knowledgeable about Stk/SS than the ones who look at S/Gas. Separate the Stk/SS cars from the others and let those techmen work their lanes. At least it would be better than what is happening in tech now.

Dyno · 03-12-2019, 08:55 PM

Some of the early Drag Pak cars were also available with the 360 A engine instead of the Gen 3 hemi. You may have looked at one of them. That would explain the angle on the bolts.

Jeff Teuton · 03-12-2019, 10:06 PM

End the bs and say who owns the car. Probably a 360. All the gen III hemi cars have vertical bolts and flat surfaces on the head and intake surfaces.

03-12-2019, 10:59 AM	#1
Brian Oakes Senior Member Join Date: Apr 2004 Posts: 570 Likes: 2 Liked 408 Times in 115 Posts	Drag pac intakes Ok, on drag pac intakes,don't the bolts go straight down from the top like a ford intake. They DO not go in on a angle like a chevy. and don't tell me the holes are not welded up either.there were a few at the Baby Gators like this and there was 1 correct one for sure and Tech was informed and nothing was done.

03-12-2019, 11:10 AM	#2
Jim Hanig Senior Member Join Date: Aug 2006 Location: Pukwana SD Posts: 860 Likes: 554 Liked 99 Times in 49 Posts	Re: Drag pac intakes standard nhra, bet they diddnt even go look at them.

03-12-2019, 04:24 PM	#3
Jason Member Join Date: Jul 2003 Posts: 235 Likes: 0 Liked 6 Times in 4 Posts	Re: Drag pac intakes Make a separate lane for Stock-S/S cars during tech and things like this can be found.

03-12-2019, 04:50 PM	#4
J.R. Haddad Senior Member Join Date: Jun 2012 Posts: 784 Likes: 936 Liked 1,464 Times in 307 Posts	Re: Drag pac intakes Jason, while in theory that might sound reasonable, the question would be who would be in those lanes looking at the cars, and has NHRA invested in the S/SS education that would be needed to know what to look for? J.R.

03-12-2019, 06:23 PM	#5
gsa612 Senior Member Join Date: Jan 2008 Location: 100th Meridian Posts: 569 Likes: 116 Liked 280 Times in 139 Posts	Re: Drag pac intakes It may be a "superseded" part # for the intake and heads...lol. gsa612

03-12-2019, 06:43 PM	#6
GTS340 Senior Member Join Date: Feb 2017 Location: Las Vegas, Nv Posts: 868 Likes: 270 Liked 1,341 Times in 408 Posts	Re: Drag pac intakes V10 ?

03-12-2019, 06:45 PM	#7
john corcoran jr Junior Member Join Date: Oct 2003 Location: darien, il Posts: 53 Likes: 0 Liked 16 Times in 10 Posts	Re: Drag pac intakes Brian, What class and engine was in the car? On the original Drag Pac motors the bolts did come in from the top. I know the second version of the 426 and the supercharged motors are a different animal. I didn't look close enough at the newer motors to remember how they mounted but the later N/A intake is different than the earlier ones.

03-12-2019, 08:55 PM	#9
Dyno Senior Member Join Date: Dec 2002 Posts: 916 Likes: 1,135 Liked 684 Times in 204 Posts	Re: Drag pac intakes Some of the early Drag Pak cars were also available with the 360 A engine instead of the Gen 3 hemi. You may have looked at one of them. That would explain the angle on the bolts.

03-12-2019, 10:06 PM	#10
Jeff Teuton VIP Member Join Date: Jan 2002 Location: Houma, LA Posts: 2,717 Likes: 2 Liked 325 Times in 50 Posts	Re: Drag pac intakes End the bs and say who owns the car. Probably a 360. All the gen III hemi cars have vertical bolts and flat surfaces on the head and intake surfaces. __________________ Jeff Teuton 4022 STK