Cleaning out the garage

bert powell · 03-16-2018, 03:26 PM

402 BBC Diamond pistons new/unused 4.191 bore .0415/.043/3mm coated top. Will throw in ring set with 4 dyno pulls. $700
JE 396/350 pistons (6), Crower rods 2.200/.927x2.500 (2 new), new pins. Need 2 pistons to complete $500
290 Heads Up heads, one repaired but would replace, with valves $800
TH400 reverse valve body, alum drums, deep pan, locking dipstick, less than 100 runs since new, 30 since rebuild $900
Jesel belt drive BBC 9.8, everything there but would replace belt and seals $500
Jesel belt drive BBC 9.8, excellent with brand new belt $650
BBC 904 Isky lifters excellent condition $500
BBC 904 Isky lifters fresh from rebuild $700
Misc roller cams std bore $150
Alum CSI 168t auto flexplate $60
12 bolt street gears 3.90 $75
Q-jet prepped carbs $300 each
292 head castings, 2 sets $250 ea set
049 head castings $300
291 heads, Ferrera valves, dual springs, need rebuilt $600
215 heads complete takeoff $350
236, 049 and 820 single castings $100 ea
6223 crank std/std nitrided, ex cond $350
454 7416 steel crank need turned $150
454 cast cranks need turned $50 ea
327 sj 1965 block cleaned, needs honed $150
454 block .030 with one sleeve, may clean up $300
454 block std $500
396 block std bore $250
402 block from Hettler engine 4.193 currently, filled, 2 bolt, clean up at 4.200 $150
82-92 camaro plastic headlights, lightweight, new in box $60
Merlin intake, oval port, ported for super stock $400
Quay headers for 82-92 camaro 2 1/8- 2 ¼ step, dyno time only $500
New Dana 60 5.57 Richmond pro gear $350
85 camaro ground effects $100
82 camaro factory fiberglass hood, one corner needs minor repair $300
14x32 M/T radial slicks, 35 runs $200
All plus shipping call or text 9 19 9618505

Bob Lasko · 03-16-2018, 06:21 PM

interested in the head lights, all four.
Bob Lasko
lasko@optonline.net

Chipper Chapman · 03-16-2018, 08:16 PM

Pm sent

bert powell · 03-19-2018, 01:40 PM

email sent

Quote:

Originally Posted by Bob Lasko

interested in the head lights, all four.
Bob Lasko
lasko@optonline.net

bert powell · 03-19-2018, 01:48 PM

PM sent

Quote:

Originally Posted by Chipper Chapman

Pm sent

bert powell · 03-28-2018, 08:30 AM

Chipper Chapman PM sent.

66novaguy · 03-29-2018, 07:22 PM

Sent you a message

03-16-2018, 03:26 PM	#1
bert powell Member Join Date: Jul 2002 Posts: 243 Likes: 36 Liked 34 Times in 12 Posts	Cleaning out the garage 402 BBC Diamond pistons new/unused 4.191 bore .0415/.043/3mm coated top. Will throw in ring set with 4 dyno pulls. $700 JE 396/350 pistons (6), Crower rods 2.200/.927x2.500 (2 new), new pins. Need 2 pistons to complete $500 290 Heads Up heads, one repaired but would replace, with valves $800 TH400 reverse valve body, alum drums, deep pan, locking dipstick, less than 100 runs since new, 30 since rebuild $900 Jesel belt drive BBC 9.8, everything there but would replace belt and seals $500 Jesel belt drive BBC 9.8, excellent with brand new belt $650 BBC 904 Isky lifters excellent condition $500 BBC 904 Isky lifters fresh from rebuild $700 Misc roller cams std bore $150 Alum CSI 168t auto flexplate $60 12 bolt street gears 3.90 $75 Q-jet prepped carbs $300 each 292 head castings, 2 sets $250 ea set 049 head castings $300 291 heads, Ferrera valves, dual springs, need rebuilt $600 215 heads complete takeoff $350 236, 049 and 820 single castings $100 ea 6223 crank std/std nitrided, ex cond $350 454 7416 steel crank need turned $150 454 cast cranks need turned $50 ea 327 sj 1965 block cleaned, needs honed $150 454 block .030 with one sleeve, may clean up $300 454 block std $500 396 block std bore $250 402 block from Hettler engine 4.193 currently, filled, 2 bolt, clean up at 4.200 $150 82-92 camaro plastic headlights, lightweight, new in box $60 Merlin intake, oval port, ported for super stock $400 Quay headers for 82-92 camaro 2 1/8- 2 ¼ step, dyno time only $500 New Dana 60 5.57 Richmond pro gear $350 85 camaro ground effects $100 82 camaro factory fiberglass hood, one corner needs minor repair $300 14x32 M/T radial slicks, 35 runs $200 All plus shipping call or text 9 19 9618505 Last edited by bert powell; 04-10-2018 at 11:11 PM. Reason: Remove sold items

03-16-2018, 06:21 PM	#2
Bob Lasko Senior Member Join Date: Jan 2002 Location: Wilton,CT Posts: 630 Likes: 0 Liked 186 Times in 55 Posts	Re: Cleaning out the garage interested in the head lights, all four. Bob Lasko lasko@optonline.net

03-16-2018, 08:16 PM	#3
Chipper Chapman Member Join Date: Jan 2004 Location: Belmont N.S. Canada Posts: 473 Likes: 246 Liked 166 Times in 71 Posts	Re: Cleaning out the garage Pm sent __________________ Chris Chapman 1969 Chevelle NHRA F-G/SA 1090

03-28-2018, 08:30 AM	#6
bert powell Member Join Date: Jul 2002 Posts: 243 Likes: 36 Liked 34 Times in 12 Posts	Re: Cleaning out the garage Chipper Chapman PM sent.

03-29-2018, 07:22 PM	#7
66novaguy Junior Member Join Date: Mar 2018 Posts: 1 Likes: 0 Liked 0 Times in 0 Posts	Re: Cleaning out the garage Sent you a message