Pro-trans VS McClay metric

[GTX JOHN]

We run Pro Trans in ALL our race cars.....It made a dramatic difference
in our performance!

Dave is happy to help figure out the optimum ratios for our varied
combos. Only a segment of potential possibilities he can build are
optimal........Too complicated for my elderly mind.

Pro Trans made a significant difference.....
Now qualify top 16 rather than towards the middle of the pack with our old junk.

I do not know what brand or which eliminator you are running......But if the Smiths build
it: It will work RIGHT.

[Glenn Briglio]

Originally Posted by GTX JOHN

We run Pro Trans in ALL our race cars.....It made a dramatic difference
in our performance!

Dave is happy to help figure out the optimum ratios for our varied
combos. Only a segment of potential possibilities he can build are
optimal........Too complicated for my elderly mind.

Pro Trans made a significant difference.....
Now qualify top 16 rather than towards the middle of the pack with our old junk.

I do not know what brand or which eliminator you are running......But if the Smiths build
it: It will work RIGHT.

Which trans did you use before and who did them?

[GTX JOHN]

Originally Posted by Glenn Briglio

Which trans did you use before and who did them?

I do not want to name names......It was a major trans builder and we utilized the Alum Drums and Straight cut gears from Protrans in our transmissions ...........trying to save a couple bucks.

I will not poor mouth anyone.........They held up well and the transmissions worked great just not the same performance as Dave Smith builds by a Tenth!

Dave has been doing this for 40 plus years that I remember.

You buy the BEST........You only cry ONCE!

[Glenn Briglio]

Originally Posted by GTX JOHN

I do not want to name names......It was a major trans builder and we utilized the Alum Drums and Straight cut gears from Protrans in our transmissions ...........trying to save a couple bucks.

I will not poor mouth anyone.........They held up well and the transmissions worked great just not the same performance as Dave Smith builds by a Tenth!

Dave has been doing this for 40 plus years that I remember.

You buy the BEST........You only cry ONCE!

I understand, but did you have a 904 ? Chevy stuff is different with t200 and t350 pro trans.

[Lee Valentine]

Call Sepanek you won't be disappointed.

[Denny Steward]

To add a question into this mix, I have a customer with a McClay 200 he likes to stage at a low rpm, when he hits to trans brake button the car will roll forward. If you bring the RPMs up to 2000 while rolling in to stage it is ok. anybody else fighting this.

[Herbie Null]

I switched to PRO TRANS and was very satisfied so I bought a second one. Sepanek maintains them, you will never find a more reasonable and trusting guy than Jack. Give him a call, he services and builds all types of transmissions and he would be the best one to give you advise on your question. 570-457-6517

[Mark Markow]

Originally Posted by Denny Steward

To add a question into this mix, I have a customer with a McClay 200 he likes to stage at a low rpm, when he hits to trans brake button the car will roll forward. If you bring the RPMs up to 2000 while rolling in to stage it is ok. anybody else fighting this.

i believe low pump pressure, causes it.

[GTX JOHN]

Originally Posted by Glenn Briglio

I understand, but did you have a 904 ? Chevy stuff is different with t200 and t350 pro trans.

We run 727 and 904 in our stock or SS stuff/ Glide in No Prep.