67 Cuda O/SA

James L Miller · 08-10-2017, 08:05 PM

Looks like a good time to open up the fenderwells a bit, particularly on the front edge so you can get a 30" tall slick under there. I dropped off some 302 heads at a local machine shop that I bought from Terry Dye last week when I was in Detroit. Just a clean up and Magnaflux to check for cracks. That's all I can afford after making the trip. I also bought some Centerline front wheels with the Mopar only 5 on 4" BC.

David Lee · 08-10-2017, 08:47 PM

I may do that, but i need to get the right axles to where to open up the wheel wells. Once its all in primer, its going to be a front to back progression.

Dave Muller · 08-10-2017, 10:21 PM

Looks like a great project!

David Lee · 08-10-2017, 10:34 PM

you inspired to start this

340Cuda · 08-11-2017, 08:22 AM

Good luck and please keep us posted on your progress.

Bill

Dave Muller · 08-12-2017, 11:24 AM

Quote:

Originally Posted by David Lee

you inspired to start this

Okay, that made my day!

Rag71 · 08-13-2017, 11:01 AM

what is the o/sa combo ? looked in link here doesn't list is it a 273 2bbl ? where are you located ?

Dwight Southerland · 08-13-2017, 03:02 PM

The only O/SA combination I see is a '68 318 2-bbl.

joe huestis · 08-13-2017, 04:53 PM

Possible Q/R combo with 273-2V . 17.64 factor according to Dwight's website as a '67. Now that would be sweet !

08-10-2017, 08:05 PM	#1
James L Miller Member Join Date: Apr 2005 Posts: 494 Likes: 6 Liked 25 Times in 16 Posts	Re: 67 Cuda O/SA Looks like a good time to open up the fenderwells a bit, particularly on the front edge so you can get a 30" tall slick under there. I dropped off some 302 heads at a local machine shop that I bought from Terry Dye last week when I was in Detroit. Just a clean up and Magnaflux to check for cracks. That's all I can afford after making the trip. I also bought some Centerline front wheels with the Mopar only 5 on 4" BC. __________________ Mopar 2 Ya!

08-10-2017, 08:47 PM	#2
David Lee VIP Member Join Date: Oct 2007 Posts: 1,168 Likes: 487 Liked 346 Times in 126 Posts	Re: 67 Cuda O/SA I may do that, but i need to get the right axles to where to open up the wheel wells. Once its all in primer, its going to be a front to back progression.

08-10-2017, 10:21 PM	#3
Dave Muller Member Join Date: Apr 2014 Location: Mesa, AZ Posts: 497 Likes: 162 Liked 223 Times in 73 Posts	Re: 67 Cuda O/SA Looks like a great project!

08-10-2017, 10:34 PM	#4
David Lee VIP Member Join Date: Oct 2007 Posts: 1,168 Likes: 487 Liked 346 Times in 126 Posts	Re: 67 Cuda O/SA you inspired to start this

08-11-2017, 08:22 AM	#5
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,672 Likes: 3,866 Liked 802 Times in 339 Posts	Re: 67 Cuda O/SA Good luck and please keep us posted on your progress. Bill

08-13-2017, 11:01 AM	#7
Rag71 Junior Member Join Date: Aug 2014 Posts: 46 Likes: 9 Liked 9 Times in 5 Posts	Re: 67 Cuda O/SA what is the o/sa combo ? looked in link here doesn't list is it a 273 2bbl ? where are you located ?

08-13-2017, 03:02 PM	#8
Dwight Southerland VIP Member Join Date: Dec 2001 Location: Arkansas - In the middle of everything. Posts: 2,001 Likes: 64 Liked 780 Times in 194 Posts	Re: 67 Cuda O/SA The only O/SA combination I see is a '68 318 2-bbl. __________________

08-13-2017, 04:53 PM	#9
joe huestis Senior Member Join Date: May 2006 Location: Youngsville, N.C. Posts: 623 Likes: 281 Liked 409 Times in 113 Posts	Re: 67 Cuda O/SA Possible Q/R combo with 273-2V . 17.64 factor according to Dwight's website as a '67. Now that would be sweet ! __________________ Joe Huestis "Annie's Song" Racing U/SA 2724 Youngsville, NC Last edited by joe huestis; 08-13-2017 at 04:55 PM. Reason: Add on