Q-Jet rods, hangers, & weather stat.

Danny Ashley · 07-03-2017, 12:56 PM

Bruce:
I used a lathe to make all my rods. The smallest I ever made for a customer was .020. He wanted long power tips which is a challenge in that size. Went through a few before I finally got a good pair. I would just about get the final sizing and the tip would break off. Guess that's what happens when you aren't a real machinist. LOL! I finally figured out how to do it without the breakage but never had to make any that small ever again. Thank the Lord.

07-03-2017, 12:56 PM	#1
Danny Ashley Member Join Date: Nov 2001 Location: Marion,In. Posts: 267 Likes: 60 Liked 110 Times in 29 Posts	Re: Q-Jet rods, hangers, & weather stat. Bruce: I used a lathe to make all my rods. The smallest I ever made for a customer was .020. He wanted long power tips which is a challenge in that size. Went through a few before I finally got a good pair. I would just about get the final sizing and the tip would break off. Guess that's what happens when you aren't a real machinist. LOL! I finally figured out how to do it without the breakage but never had to make any that small ever again. Thank the Lord.