327/275 Stocker Engine

Don Fardie · 03-19-2016, 07:59 PM

327/ 275 Chevy Engine
Engine Builder Tom Boucher

COMPLETE ENGINE CARB TO PAN
Fully race prepared block .060 over. Block Filled
Interior surfaces Glyptal coated
C10CP Carrillo .060 Pistons
Custom Gapless Total Seal Rings
Manley Rods
GM Forged Crank
Bullet Cam 4/7 Swap
Schubeck Hyd. Lifters
Fully race prepared 041X Heads
Manley Valves
3/8 Push rods
Bullet springs
Guide Plates
Comp Cams Ultra Pro Magnum XD Roller Rockers
Melling Oil pump
Chevy II Milodon Oil Pan w/ heater pad
Aerospace elect Water Pump
Tom Cassen 750 Quadrajet
Asking $7500 Serious inquires only
Call any time 508-942-2409 or PM me for any questions.

*Have all records for engine builds.
*Have Dyno sheets from last build

nhra63corv · 03-21-2016, 09:12 PM

What class did you run with this combo ?

Don Fardie · 03-22-2016, 03:38 PM

F/S set the record back in 07-09...... 10.89

G money · 03-26-2016, 09:15 AM

I hope this doesn't mean your not running stock any more ?

G. Walters/ F/SA

Jerry Terry · 03-26-2016, 05:34 PM

How fresh is it ?

Thanks Jerry

Don Fardie · 03-26-2016, 06:10 PM

To answer your question... yes. I'm changing classes and going to be running some Nostalgia Class racing. Though I could run this motor, I much rather run a bigger cubic inch and build something that is not as restrictive as a Stocker motor. I’ll still be around, so you haven’t got rid of me yet!

Please note the motor also comes with an OEM in the box spare GM forge crank and 2 additional ready intakes.

Don Fardie · 03-27-2016, 12:58 PM

Sorry I didn't see your post yesterday Jerry.......Since having the a new block and heads done I've put about 90 runs including Dyno time. Last time out last fall the car was running consistently high10.9's. .....there more there, but need more time to dial in the new clutch.
If it was completely refreshed I'd be asking more. Anybody who knows the car knows how I meticulous I am with my stuff and how well it is maintained. This is a good piece!

Don Fardie · 04-17-2016, 11:49 AM

Engine SOLD...Thanks Class Racer
Plus I think I may have broke another record with this engine with the most views for an Engine for Sale!!! LOL

03-19-2016, 07:59 PM	#1
Don Fardie Member Join Date: Feb 2003 Location: Lakeville, Ma Posts: 253 Likes: 0 Liked 0 Times in 0 Posts	327/275 Stocker Engine 327/ 275 Chevy Engine Engine Builder Tom Boucher COMPLETE ENGINE CARB TO PAN Fully race prepared block .060 over. Block Filled Interior surfaces Glyptal coated C10CP Carrillo .060 Pistons Custom Gapless Total Seal Rings Manley Rods GM Forged Crank Bullet Cam 4/7 Swap Schubeck Hyd. Lifters Fully race prepared 041X Heads Manley Valves 3/8 Push rods Bullet springs Guide Plates Comp Cams Ultra Pro Magnum XD Roller Rockers Melling Oil pump Chevy II Milodon Oil Pan w/ heater pad Aerospace elect Water Pump Tom Cassen 750 Quadrajet Asking $7500 Serious inquires only Call any time 508-942-2409 or PM me for any questions. Have all records for engine builds. Have Dyno sheets from last build __________________ Don Fardie 1582 F/S B/G Last edited by Don Fardie; 03-20-2016 at 08:08 AM.

03-21-2016, 09:12 PM	#2
nhra63corv Junior Member Join Date: Oct 2010 Posts: 46 Likes: 0 Liked 3 Times in 2 Posts	Re: 327/275 Stocker Engine What class did you run with this combo ?

03-22-2016, 03:38 PM	#3
Don Fardie Member Join Date: Feb 2003 Location: Lakeville, Ma Posts: 253 Likes: 0 Liked 0 Times in 0 Posts	Re: 327/275 Stocker Engine F/S set the record back in 07-09...... 10.89 __________________ Don Fardie 1582 F/S B/G

03-26-2016, 09:15 AM	#4
G money Junior Member Join Date: Jul 2013 Posts: 47 Likes: 154 Liked 13 Times in 13 Posts	Re: 327/275 Stocker Engine I hope this doesn't mean your not running stock any more ? G. Walters/ F/SA

03-26-2016, 05:34 PM	#5
Jerry Terry Senior Member Join Date: Jul 2003 Location: Cincinnati Posts: 650 Likes: 6,068 Liked 450 Times in 133 Posts	Re: 327/275 Stocker Engine How fresh is it ? Thanks Jerry

03-26-2016, 06:10 PM	#6
Don Fardie Member Join Date: Feb 2003 Location: Lakeville, Ma Posts: 253 Likes: 0 Liked 0 Times in 0 Posts	Re: 327/275 Stocker Engine To answer your question... yes. I'm changing classes and going to be running some Nostalgia Class racing. Though I could run this motor, I much rather run a bigger cubic inch and build something that is not as restrictive as a Stocker motor. I’ll still be around, so you haven’t got rid of me yet! Please note the motor also comes with an OEM in the box spare GM forge crank and 2 additional ready intakes. __________________ Don Fardie 1582 F/S B/G

03-27-2016, 12:58 PM	#7
Don Fardie Member Join Date: Feb 2003 Location: Lakeville, Ma Posts: 253 Likes: 0 Liked 0 Times in 0 Posts	Re: 327/275 Stocker Engine Sorry I didn't see your post yesterday Jerry.......Since having the a new block and heads done I've put about 90 runs including Dyno time. Last time out last fall the car was running consistently high10.9's. .....there more there, but need more time to dial in the new clutch. If it was completely refreshed I'd be asking more. Anybody who knows the car knows how I meticulous I am with my stuff and how well it is maintained. This is a good piece! __________________ Don Fardie 1582 F/S B/G

04-17-2016, 11:49 AM	#8
Don Fardie Member Join Date: Feb 2003 Location: Lakeville, Ma Posts: 253 Likes: 0 Liked 0 Times in 0 Posts	Re: 327/275 Stocker Engine Engine SOLD...Thanks Class Racer Plus I think I may have broke another record with this engine with the most views for an Engine for Sale!!! LOL __________________ Don Fardie 1582 F/S B/G