Where do i belong?

1320racer · 03-12-2016, 12:44 PM

Quote:

Originally Posted by FireSale

In Pro bracket, a cage is required at 11.00

10.0 not 11.0

Chris1529 · 03-12-2016, 01:25 PM

By the rule book too I believe, the cars are not even supposed to have drag radials or cold air intakes, etc. They are supposed to be bone stock on street tires.

dragracer9911 · 03-12-2016, 01:47 PM

That's my understanding, 100% OEM.

FireSale · 03-12-2016, 05:18 PM

Quote:

Originally Posted by 1320racer

10.0 not 11.0

I was off by a tick.
2016 Super Pro/Pro/Sportsman section:

Roll bar mandatory: 11.00 - 11.49 all cars.
Roll cage mandatory: 10.99 or quicker / 135+.
Full-bodied cars, with unaltered firewall, floor, and body (from firewall rearward, wheel tubs permitted), running between 10.00 (*6.40) and 10.99 (*6.99), roll bar permitted in place of roll cage.

Dale

HCDB2 · 03-12-2016, 06:26 PM

Thanks, point taken on the "butchering".....LOL.

I have been reading the rulebook & learning a bit, seems i am confined to the street style events without a roll bar, wealh of info on this forum, thanks!

ken robinson · 03-13-2016, 10:12 AM

I would do the roller bar and belts . Run bracket pro class and the 11.00 index at some div. races with alittle de-tuning . I don't think its listed as a stocker in the books yet . I know a guy who had a new mustang who put a roller cage in it raced for a year . He cut the bar out and traded it in for a newer mustang you could tell are was a bar in it .They were very carefull with the carpeting . Just don't take it in for warranty work/recalls . LOL

03-12-2016, 01:25 PM	#2
Chris1529 VIP Member Join Date: Dec 2006 Location: West Virginia Posts: 1,366 Likes: 6 Liked 70 Times in 29 Posts	Re: Where do i belong? By the rule book too I believe, the cars are not even supposed to have drag radials or cold air intakes, etc. They are supposed to be bone stock on street tires. __________________ Chris Bowman The Mountain State Mustang 1984 Mustang GT350

03-12-2016, 01:47 PM	#3
dragracer9911 Junior Member Join Date: Feb 2010 Location: Southern Maryland Posts: 75 Likes: 0 Liked 3 Times in 1 Post	Re: Where do i belong? That's my understanding, 100% OEM.

03-12-2016, 06:26 PM	#5
HCDB2 Junior Member Join Date: Mar 2016 Posts: 2 Likes: 0 Liked 0 Times in 0 Posts	Re: Where do i belong? Thanks, point taken on the "butchering".....LOL. I have been reading the rulebook & learning a bit, seems i am confined to the street style events without a roll bar, wealh of info on this forum, thanks!

03-13-2016, 10:12 AM	#6
ken robinson Member Join Date: Dec 2001 Location: tomsriver nj Posts: 480 Likes: 74 Liked 222 Times in 87 Posts	Re: Where do i belong? I would do the roller bar and belts . Run bracket pro class and the 11.00 index at some div. races with alittle de-tuning . I don't think its listed as a stocker in the books yet . I know a guy who had a new mustang who put a roller cage in it raced for a year . He cut the bar out and traded it in for a newer mustang you could tell are was a bar in it .They were very carefull with the carpeting . Just don't take it in for warranty work/recalls . LOL