3rd gen F body, anyone run 29.5 MT slicks?

REGGIE WINKLES · 08-27-2015, 02:41 PM

[QUOTE=Eman;479931]Anyone run a 29.5 diameter MT slick on their 3rd gen Camaro? I was wondering if the diameter fits in the wheel well opening. I've run a 29 hoosier and it fits with no problem.

If the offset is correct you shouldn't encounter any problems. My 3rd Gen is a Z/28 so I did have to "adjust" the ground effect trim panels at the front of the wheel well slightly. I use the MT 29.5 3056ST tire on 8" wheel.
Be sure to roll or remove the fender lip.

08-27-2015, 02:41 PM	#2
REGGIE WINKLES Member Join Date: Jun 2007 Location: St. Augustine, Fla. Posts: 229 Likes: 569 Liked 39 Times in 9 Posts	Re: 3rd gen F body, anyone run 29.5 MT slicks? [QUOTE=Eman;479931]Anyone run a 29.5 diameter MT slick on their 3rd gen Camaro? I was wondering if the diameter fits in the wheel well opening. I've run a 29 hoosier and it fits with no problem. If the offset is correct you shouldn't encounter any problems. My 3rd Gen is a Z/28 so I did have to "adjust" the ground effect trim panels at the front of the wheel well slightly. I use the MT 29.5 3056ST tire on 8" wheel. Be sure to roll or remove the fender lip. __________________ Reggie Winkles 2650/Stock