1967 camaro A/S project

impstocker · 03-01-2015, 01:10 PM

Nice Build. Question, are you using stock rubber bushings in your front upper control arms?
I have solid bushings in my Impala, used solids in bottom too. Am I too "old school"

Will Lamprecht 1965 Impala I/SA in progress.

TOSTO RACING · 03-01-2015, 06:54 PM

Quote:

Originally Posted by impstocker

Nice Build. Question, are you using stock rubber bushings in your front upper control arms?
I have solid bushings in my Impala, used solids in bottom too. Am I too "old school"

Will Lamprecht 1965 Impala I/SA in progress.

Yeh just the stock bushings upper and lowers and the teeth ground off . Front end will be loose as a goose

I was gonna buy the high dollar stuff but my uncle set up these and we decided no need to spend the extra bucks when it'll be just as loose with the stockers and some tricks.

qtrmile2 · 03-14-2015, 03:54 PM

Pics of Tim's build from today. Didn't get much done but Tim's feeling alot better.
Rolled the car outside and took some pics.

qtrmile2 · 03-14-2015, 04:15 PM

Progress Part 2

Inside of rear wheels.

TOSTO RACING · 03-14-2015, 04:30 PM

I am feeling a lot better still be awhile before I can turn some wrenches , but my new wheels came in for the rear so I had to talk my buddy Garret into mounting them and my Dad to put them on this weekend (thanks guys)I had to see them on the car!
I also have to say Sander engineering makes an awesome product they even polished the inside of the wheels and anodized the centers and Beadlock rings and machined them just like I asked and they look awesome!

The car is really turning out nice and I can't wait to set the motor in it and get it running!

Matt S · 12-20-2015, 12:28 AM

Quote:

Originally Posted by qtrmile2

Tim, what size rear wheels and tires are on the car, and what backspace?

TOSTO RACING · 12-20-2015, 10:38 AM

Matt,

They are 15x10 with 5 inch backspace . The tires are Mickey Thompson 29.5 x 9.0 x 15S

larrylomascolo · 12-23-2015, 10:07 AM

What a beautiful tire package ,just like the tire on your red stocker you had,man that is gona be hard to decal that thing if contingent money is in the plan,super sharp stocker ,you do nice work,what are you aiming at .8 to 1.0 under

03-01-2015, 01:10 PM	#1
impstocker Member Join Date: Dec 2008 Location: Wingdale, NY Posts: 302 Likes: 27 Liked 53 Times in 16 Posts	Re: 1967 camaro A/S project Nice Build. Question, are you using stock rubber bushings in your front upper control arms? I have solid bushings in my Impala, used solids in bottom too. Am I too "old school" Will Lamprecht 1965 Impala I/SA in progress.

03-14-2015, 03:54 PM	#3
qtrmile2 Junior Member Join Date: Jan 2008 Location: Moscow Mills.Mo. Posts: 74 Likes: 0 Liked 9 Times in 4 Posts	Re: 1967 camaro A/S project Pics of Tim's build from today. Didn't get much done but Tim's feeling alot better. Rolled the car outside and took some pics. __________________ Tostoracing Retired S/ST and Stock owner/Driver Div. 5 Tech certification team

03-14-2015, 04:15 PM	#4
qtrmile2 Junior Member Join Date: Jan 2008 Location: Moscow Mills.Mo. Posts: 74 Likes: 0 Liked 9 Times in 4 Posts	Re: 1967 camaro A/S project Progress Part 2 Inside of rear wheels. __________________ Tostoracing Retired S/ST and Stock owner/Driver Div. 5 Tech certification team

03-14-2015, 04:30 PM	#5
TOSTO RACING Senior Member Join Date: May 2007 Location: DRAGSTRIP Posts: 886 Likes: 883 Liked 652 Times in 184 Posts	Re: 1967 camaro A/S project I am feeling a lot better still be awhile before I can turn some wrenches , but my new wheels came in for the rear so I had to talk my buddy Garret into mounting them and my Dad to put them on this weekend (thanks guys)I had to see them on the car! I also have to say Sander engineering makes an awesome product they even polished the inside of the wheels and anodized the centers and Beadlock rings and machined them just like I asked and they look awesome! The car is really turning out nice and I can't wait to set the motor in it and get it running! __________________ 5664 GHI/SA 1985 CAMARO RED H/SA 1985 CAMARO BLUE I/SA

12-20-2015, 10:38 AM	#7
TOSTO RACING Senior Member Join Date: May 2007 Location: DRAGSTRIP Posts: 886 Likes: 883 Liked 652 Times in 184 Posts	Re: 1967 camaro A/S project Matt, They are 15x10 with 5 inch backspace . The tires are Mickey Thompson 29.5 x 9.0 x 15S __________________ 5664 GHI/SA 1985 CAMARO RED H/SA 1985 CAMARO BLUE I/SA

12-23-2015, 10:07 AM	#8
larrylomascolo Member Join Date: Nov 2008 Location: Ontario,canada Posts: 440 Likes: 70 Liked 66 Times in 29 Posts	Re: 1967 camaro A/S project What a beautiful tire package ,just like the tire on your red stocker you had,man that is gona be hard to decal that thing if contingent money is in the plan,super sharp stocker ,you do nice work,what are you aiming at .8 to 1.0 under Last edited by larrylomascolo; 12-23-2015 at 10:16 AM.