|
|
11-20-2014, 06:43 PM
|
#2 |
|
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 909
Likes: 70
Liked 239 Times in 114 Posts
|
Re: Roller Rockers on LT-1
Shouldn't have any clearance problems with the rockers to head studs, I would recommend the 12 point nuts. If you are going to hone the block (recommended), make sure you do it with the studs installed first. Using the studs with torque plates to hone the block.
|
|
|
|
|
Threaded Mode