|
![]() |
#4 |
VIP Member
Join Date: Dec 2002
Location: Lower Dakota territory
Posts: 1,180
Likes: 1,074
Liked 799 Times in 236 Posts
|
![]()
Alan, the '65 396-425's (Corvette and full size Chevys) had a mechanical lifter camshaft with .497/.503 lift. This was a different camshaft than the '66 and later 396-375's and 427-425's (.520/.520).
The '65 396/375 was only available in the Z16 Chevelle. That motor was virtually the same as the '65 396-425's with the exception that it used a hydraulic cam (.461/.500). Most people assume the '65 396-375 Z16 is an L78, which it isn't. It's actually an L37. Hope this helps. -Al
__________________
"That'll never work....." |
![]() |
![]() |
|
|