WTB 4.060-070 Bore SBC Pistons+Hyd Roller Cam

Chipper Chapman · 07-14-2014, 11:01 AM

I have a bullet hr zz3 crate stock grind. .480/.480 lift and 268/274 at .050. Very little use, $100 plus the ride

Karl Owens · 07-14-2014, 05:37 PM

OK do you take Paypal?

Robert Simpson · 07-15-2014, 07:18 AM

I have a couple sets of .030 SBC stocker pistons. Lunati or Venolia, .927 pins. $300 obo each set. Hope this helps.

Steve Williams · 07-15-2014, 06:09 PM

I have a set of .060 over pistons, brand new. I believe they are flat tops. Let me know and I will dig them out and confirm. I also think I have rings to go with them. Don't let new scare you, it will be cheap.

07-14-2014, 11:01 AM	#1
Chipper Chapman Member Join Date: Jan 2004 Location: Belmont N.S. Canada Posts: 473 Likes: 246 Liked 166 Times in 71 Posts	Re: WTB 4.060-070 Bore SBC Pistons+Hyd Roller Cam I have a bullet hr zz3 crate stock grind. .480/.480 lift and 268/274 at .050. Very little use, $100 plus the ride __________________ Chris Chapman 1969 Chevelle NHRA F-G/SA 1090

07-14-2014, 05:37 PM	#2
Karl Owens Junior Member Join Date: Dec 2009 Posts: 69 Likes: 0 Liked 1 Time in 1 Post	Re: WTB 4.060-070 Bore SBC Pistons+Hyd Roller Cam OK do you take Paypal? __________________ NHRA Stock/Super Stock 1078

07-15-2014, 07:18 AM	#3
Robert Simpson Senior Member Join Date: Aug 2004 Location: Jacksonville, Florida Posts: 808 Likes: 7 Liked 20 Times in 12 Posts	Re: WTB 4.060-070 Bore SBC Pistons+Hyd Roller Cam I have a couple sets of .030 SBC stocker pistons. Lunati or Venolia, .927 pins. $300 obo each set. Hope this helps.

07-15-2014, 06:09 PM	#4
Steve Williams Member Join Date: Aug 2007 Location: Detroit, Michigan Posts: 352 Likes: 0 Liked 1 Time in 1 Post	Re: WTB 4.060-070 Bore SBC Pistons+Hyd Roller Cam I have a set of .060 over pistons, brand new. I believe they are flat tops. Let me know and I will dig them out and confirm. I also think I have rings to go with them. Don't let new scare you, it will be cheap.