|
![]() |
#1 |
Junior Member
Join Date: Jun 2007
Posts: 58
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
anybody ever seen a issue with the barry grant pump having inconsistant fuel pressure? the pump im refering to is the 280 bg
|
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Jun 2006
Location: CANADA
Posts: 76
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
If you have a BG -2 port regulator, that could be your problem. Myself and a few other racers had new ones that were junk out of the box. Some guys even bought them twice and it only resulted in twice the headache. ---- Kevin ---
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Dec 2006
Location: Brandon, MS
Posts: 18
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I had the same problems with the BG 400 pump caused by premature wear of the rotor or vane and housing inside the billet base. The pump lost 25% of the pressure in less than 150 passes. I am sending it back for rebuild the second time in two years. Thinking about going to an Aeromotive pump.
__________________
80Corvette |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Mar 2002
Posts: 1,106
Likes: 57
Liked 507 Times in 116 Posts
|
![]()
A couple of years ago i bought a BG280 pump and 2 port regulator. The fuel pressure was all over the place. One minute it would be a 7 lbs and the next over 10. If i reved up the engine it would drop below 5. When it did creep up above up the carb would flood. Jegs sent me another regulator with the same results. I put back on my old Mallory regulator and the fuel pressure stays at a constant 7 psi. I now have another BG regulator but it can stay in the box as my mallory regulator works fine. The BG pump works great but the regulators are junk.
__________________
68 Chevy11 327 F/S |
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
![]()
Get rid of it and get a MagnaFuel. They are field servicable for $20, balanced stator (no more leaks between the motor and pump), and a much better company to deal with. I would not put a BG pump back in one of my cars if it were free...............(excpet the one I had to borrow from Little Joe at Atlanta Last year)
__________________
Chad Rhodes 2113 I/SA |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Sep 2004
Location: Cumming,Ga. USA
Posts: 967
Likes: 36
Liked 60 Times in 12 Posts
|
![]()
I have one, real consistent. Works great- as a wheel chock.
.
__________________
2894 STK |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Dec 2006
Location: Indy
Posts: 422
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Never had a bit of trouble with one of these....
![]() ![]() |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jun 2005
Location: Nashville N.C.
Posts: 506
Likes: 4
Liked 101 Times in 27 Posts
|
![]()
Anybody have anything to say good about Barry Grant stuff ???????
|
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Jan 2002
Posts: 99
Likes: 0
Liked 0 Times in 0 Posts
|
![]() |
![]() |
![]() |
![]() |
#10 |
Junior Member
Join Date: Jun 2007
Posts: 58
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
thanks to everybody who responded barry grant out aeromotive on its way
|
![]() |
![]() |
![]() |
|
|