Ford 302 Block, Crank

Steve Stickel · 10-28-2013, 11:48 PM

302 Roller block, baked and jet wash, magnafluxed, sonic tested, Hard-Blok
filled, squared and decked, galleys drilled and tapped, bored for .030 over piston
Great start for Stocker or Crate engine $550

NIB Canton main support (girdle) and windage tray #'s 21-060, 20-960, fits all 302 roller blocks $200 ***SOLD ***

NIB Canton NHRA approved stock eliminator, stock appearing oil pan. #13-600, $165, hi volume pickup for same $35

New Ford Eagle Bullet steel 4340 crank 3.013 stroke, 2.00" rods, heat treated $850 (Super Stock)

Stocker crank 3.013 stroke by Dave Le Brun @ L+L, never run, needs detailing $250 weighs 36lbs

Low Low miles (25k) stock 302 roller short block, complete, flat tops w/4 valve reliefs 1996 $500

Set GT40 3 bar like new heads, complete, from above, $350 *** SOLD ***

Set GT40P 4 bar heads, Great Start for 302/ 240hp, 250hp Stocker Crate engines $300
Paypal OK

401-556-4966 , PM here or Tomcat396@yahoo.com

Dell Edwards · 11-05-2013, 12:15 PM

Hey, just wondering if you still have the GT-40 heads and if they are un touched?
Thanks Dell

Steve Stickel · 11-06-2013, 12:52 PM

Yes, I have them, untouched. If interested please email, call or PM here
Thanks, Steve

Dell Edwards · 11-11-2013, 10:58 AM

Thanks Steve, Have been out of town, will try to call you today.

BIGPOWER · 01-06-2014, 05:49 PM

302 Stocker crank still available? if it is, 50oz. or 28oz. ??

Steve Stickel · 01-16-2014, 03:53 PM

Stock 50 oz.
Thanks

11-05-2013, 12:15 PM	#2
Dell Edwards Junior Member Join Date: Apr 2013 Location: Alva Fla Posts: 19 Likes: 0 Liked 0 Times in 0 Posts	Re: Ford 302 Block, Crank Hey, just wondering if you still have the GT-40 heads and if they are un touched? Thanks Dell

11-06-2013, 12:52 PM	#3
Steve Stickel Member Join Date: Feb 2012 Location: South Coast, Massachusetts Posts: 146 Likes: 160 Liked 50 Times in 23 Posts	Re: Ford 302 Block, Crank Yes, I have them, untouched. If interested please email, call or PM here Thanks, Steve __________________ Steve Stickel 1161 Stk 1167 SS Last edited by Steve Stickel; 11-06-2013 at 03:13 PM.

11-11-2013, 10:58 AM	#4
Dell Edwards Junior Member Join Date: Apr 2013 Location: Alva Fla Posts: 19 Likes: 0 Liked 0 Times in 0 Posts	Re: Ford 302 Block, Crank Thanks Steve, Have been out of town, will try to call you today.

01-06-2014, 05:49 PM	#5
BIGPOWER Junior Member Join Date: Mar 2013 Posts: 1 Likes: 0 Liked 0 Times in 0 Posts	Re: Ford 302 Block, Crank 302 Stocker crank still available? if it is, 50oz. or 28oz. ??

01-16-2014, 03:53 PM	#6
Steve Stickel Member Join Date: Feb 2012 Location: South Coast, Massachusetts Posts: 146 Likes: 160 Liked 50 Times in 23 Posts	Re: Ford 302 Block, Crank Stock 50 oz. Thanks __________________ Steve Stickel 1161 Stk 1167 SS

10-28-2013, 11:48 PM	#1
Steve Stickel Member Join Date: Feb 2012 Location: South Coast, Massachusetts Posts: 146 Likes: 160 Liked 50 Times in 23 Posts	Ford 302 Block, Crank 302 Roller block, baked and jet wash, magnafluxed, sonic tested, Hard-Blok filled, squared and decked, galleys drilled and tapped, bored for .030 over piston Great start for Stocker or Crate engine $550 NIB Canton main support (girdle) and windage tray #'s 21-060, 20-960, fits all 302 roller blocks $200 *SOLD * NIB Canton NHRA approved stock eliminator, stock appearing oil pan. #13-600, $165, hi volume pickup for same $35 New Ford Eagle Bullet steel 4340 crank 3.013 stroke, 2.00" rods, heat treated $850 (Super Stock) Stocker crank 3.013 stroke by Dave Le Brun @ L+L, never run, needs detailing $250 weighs 36lbs Low Low miles (25k) stock 302 roller short block, complete, flat tops w/4 valve reliefs 1996 $500 Set GT40 3 bar like new heads, complete, from above, $350 * SOLD * Set GT40P 4 bar heads, Great Start for 302/ 240hp, 250hp Stocker Crate engines $300 Paypal OK 401-556-4966 , PM here or Tomcat396@yahoo.com __________________ Steve Stickel 1161 Stk 1167 SS Last edited by Steve Stickel; 01-25-2014 at 01:08 AM. Reason: details