Nova stocker project.

HandOverFist · 12-25-2013, 03:28 PM

Better you than me Alan, hehe.

OLD INJUN · 12-25-2013, 03:50 PM

Al, try this , may be a little lean Val.

Bob Sherwood · 12-28-2013, 10:55 PM

Al try this , will correct that lean condition!!!!

Alan Nyhus · 12-29-2013, 09:00 AM

Quote:

Originally Posted by Bob Sherwood

Al try this , will correct that lean condition!!!!

Geez Bob....that things about the size of the crankshaft in my 327!

Reminds me of the 'rubber' Stocker camshaft designed by (blank blank). The lobes grew as the RPM's went up!

-Al

hadtobethere · 01-01-2014, 03:30 PM

Quote:

Originally Posted by Alan Nyhus

Geez Bob....that things about the size of the crankshaft in my 327!

Reminds me of the 'rubber' Stocker camshaft designed by (blank blank). The lobes grew as the RPM's went up!

-Al

Al, after a bit of forward thinking....most likely Stock will expand the rules, so you should be ahead of this...

It will be hard to put one of Steve's BB in that thing and call it a 327 so....Ya, Sherwood can get the 'Shadow' to work a big stick to fit, and that old Nitro kit from the Pro guy will work fine. DB has a crate motor on order that you can use. Check and see if old Northwind has a valve train, also W.S. has some parts....more later.

Alan Nyhus · 01-04-2014, 10:45 PM

Front suspension apart for a freshen-up......bushings, control arm shafts, ball joints, etc. Will also treat it to some lightweight disc brakes. Once that's back together the motor will go back in:

Relocated and raised the shifter with some 6061 I had laying around:

HandOverFist · 01-04-2014, 10:53 PM

That's clean Al...I really need to do something with our shifter as well.

12-25-2013, 03:28 PM	#1
HandOverFist VIP Member Join Date: Oct 2013 Location: Gulf Breeze, FL Posts: 1,651 Likes: 8 Liked 33 Times in 16 Posts	Re: Nova stocker project. Better you than me Alan, hehe. __________________ Rich Taylor I/SA - 321

12-25-2013, 03:50 PM	#2
OLD INJUN Member Join Date: Sep 2006 Posts: 160 Likes: 0 Liked 1 Time in 1 Post	Re: Nova stocker project. Al, try this , may be a little lean Val. Attached Thumbnails

12-28-2013, 10:55 PM	#3
Bob Sherwood Member Join Date: Jul 2006 Location: South Dakota Posts: 153 Likes: 70 Liked 388 Times in 60 Posts	Re: Nova stocker project. Al try this , will correct that lean condition!!!! Attached Thumbnails

01-04-2014, 10:45 PM	#6
Alan Nyhus VIP Member Join Date: Dec 2002 Location: Lower Dakota territory Posts: 1,180 Likes: 1,074 Liked 799 Times in 236 Posts	Re: Nova stocker project. Front suspension apart for a freshen-up......bushings, control arm shafts, ball joints, etc. Will also treat it to some lightweight disc brakes. Once that's back together the motor will go back in: Relocated and raised the shifter with some 6061 I had laying around: __________________ "That'll never work....."

01-04-2014, 10:53 PM	#7
HandOverFist VIP Member Join Date: Oct 2013 Location: Gulf Breeze, FL Posts: 1,651 Likes: 8 Liked 33 Times in 16 Posts	Re: Nova stocker project. That's clean Al...I really need to do something with our shifter as well. __________________ Rich Taylor I/SA - 321