Big Block Chevrolet main bearing spacers...

FED 387 · 10-26-2013, 03:15 PM

Looking back on my notes from about 10-12 years ago ---we ran a B/EA in Comp Eliminator with a small BBC engine bout 347 inches at the time--- we were using 348/409 cranks in 396/427 blocks to get that size engine---possible sources or parts may be sourced from the following places--- do not know if they re still around but its worth a try--this is from notes again you'll hafta do the research to see if it will apply---good luck FED387

Speed Pro part # 162M bearing

Revolution Performance & Machine

Race Engineering----561-533-5500

Lamar Waldon/Walden?? 770-449-0315

10-26-2013, 03:15 PM	#5
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,422 Likes: 529 Liked 333 Times in 180 Posts	Re: Big Block Chevrolet main bearing spacers... Looking back on my notes from about 10-12 years ago ---we ran a B/EA in Comp Eliminator with a small BBC engine bout 347 inches at the time--- we were using 348/409 cranks in 396/427 blocks to get that size engine---possible sources or parts may be sourced from the following places--- do not know if they re still around but its worth a try--this is from notes again you'll hafta do the research to see if it will apply---good luck FED387 Speed Pro part # 162M bearing Revolution Performance & Machine Race Engineering----561-533-5500 Lamar Waldon/Walden?? 770-449-0315