NHRA Tether Rule Update

Jim Wahl · 09-15-2013, 01:47 PM

Let me say first off I am for anything that makes racing safer. That said, I also must say the way NHRA is going about this smells! It smells of kickback from "approved" manufacturers. In order to achieve said kickback the current two approved manufacturers are inflating the price phenomenally. CollectorTether.com is charging $199-$249 for $30 worth of materials. I'm thinking NHRA must be pocketing about $50 or more each. It takes about 10 minutes to assemble the said parts. With 5000 race cars that will be required to install these teathers or they can't race, that works out to a quarter million bucks! Quite a handsome profit for a few clamps and some steel cable. The Lokar pieces are unbelievably over thought and complicated. The HeaderTether.com piece is much more slick and better thought out. Neither one is worth more than $50 racer price. Also as of this date, neither are SFI approved but NHRA is allowing them. I am very doubtful they will ever be SFI approved. Just another way of keeping the individual racer from making their own tether!

If NHRA was genuinely interested in correcting a problem (more people have been killed by loose Top Fueler tires) they would set a standard, much like the roll bar rules, and allow racers to fabricate their own header tethers. I will NOT be paying $200-$250 for this newest obvious NHRA money making enterprise paid for on the backs of the racer. Nor will I be hacking up my $2600 SS headers by welding them all together, this was a disingenuous alternative by NHRA. I will make my own tethers. I am fully capable, as are 90% of the racers I compete with. If they are not acceptable, I will not race with the NHRA until they rethink this deal. Scooter Peaco must be smiling somewhere right about now. Jim

.

09-15-2013, 01:47 PM	#10
Jim Wahl Veteran Member Join Date: Jan 2002 Location: Central Florida Posts: 5,844 Likes: 666 Liked 683 Times in 129 Posts	Re: NHRA Tether Rule Update Let me say first off I am for anything that makes racing safer. That said, I also must say the way NHRA is going about this smells! It smells of kickback from "approved" manufacturers. In order to achieve said kickback the current two approved manufacturers are inflating the price phenomenally. CollectorTether.com is charging $199-$249 for $30 worth of materials. I'm thinking NHRA must be pocketing about $50 or more each. It takes about 10 minutes to assemble the said parts. With 5000 race cars that will be required to install these teathers or they can't race, that works out to a quarter million bucks! Quite a handsome profit for a few clamps and some steel cable. The Lokar pieces are unbelievably over thought and complicated. The HeaderTether.com piece is much more slick and better thought out. Neither one is worth more than $50 racer price. Also as of this date, neither are SFI approved but NHRA is allowing them. I am very doubtful they will ever be SFI approved. Just another way of keeping the individual racer from making their own tether! If NHRA was genuinely interested in correcting a problem (more people have been killed by loose Top Fueler tires) they would set a standard, much like the roll bar rules, and allow racers to fabricate their own header tethers. I will NOT be paying $200-$250 for this newest obvious NHRA money making enterprise paid for on the backs of the racer. Nor will I be hacking up my $2600 SS headers by welding them all together, this was a disingenuous alternative by NHRA. I will make my own tethers. I am fully capable, as are 90% of the racers I compete with. If they are not acceptable, I will not race with the NHRA until they rethink this deal. Scooter Peaco must be smiling somewhere right about now. Jim . __________________ Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 NHRA D2 National Open Stock Champion 1982 NHRA D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association. Last edited by Jim Wahl; 09-15-2013 at 01:53 PM.