Radiator for 3rd gen stocker

Doug Blackley · 06-17-2013, 08:58 PM

That's the issue, the v6 rad is not as long. Look for a v8 3rd gen plastic upper rad support. Also move the lower rubbers to the outer position. If I recall correctly there was a plastic side piece you had to take out to fully expose the opening. You might want to check if you can use a fully aluminum rad as the o.e was alum with plastic tanks. Will say that the o.e. replacement rad will cool things fine

06-17-2013, 08:58 PM	#7
Doug Blackley Member Join Date: Dec 2001 Location: Hanover, MA Posts: 430 Likes: 3 Liked 1 Time in 1 Post	Re: Radiator for 3rd gen stocker That's the issue, the v6 rad is not as long. Look for a v8 3rd gen plastic upper rad support. Also move the lower rubbers to the outer position. If I recall correctly there was a plastic side piece you had to take out to fully expose the opening. You might want to check if you can use a fully aluminum rad as the o.e was alum with plastic tanks. Will say that the o.e. replacement rad will cool things fine __________________ Doug Blackley 1697 STK