Project Junkyard Dog

Joe Toller · 04-20-2013, 07:08 PM

Well I got a little done today before Mother Nature revolted, the engine compartment is ready for the pressure washer and some rattle can flat black. I threw in a couple newer pics, how about that patina? I kinda wanna keep it...

I also made a run to the wrecking yard, and scored a couple pieces I need, which lead to my cheap tips of the day:
Need a high output coil? Check out a TFI coil on a fuel injected 5.0 Ford. They're 40,000 volts and fairly compact. I got one for $5
Need a cheap GM mini starter? Try a 94-98 GM pickup 350, 96-98 S-10 or Blazer 4.3, or 97-98 Astro. Compact, gear-reduction, and in my case, $10!
I also threw in a pic of my 95 Cougar electric fan, fits a GM radiator perfectly.

Billy Nees · 04-20-2013, 07:17 PM

Good Buzzard!

Joe Toller · 04-30-2013, 10:01 AM

Well, the Dog is plumbed and wired, suspension is all done, and the short block is awaiting a cam (HUGE thanks to Bob Shaw). Heads are almost ready to pick up too. I went through the th350 with a new seal kit, filter, and B&M shift kit. When the motor goes in I will update next.

Joe Toller · 04-30-2013, 04:02 PM

I would like to thank Tony Massari and Bob Shaw for all of their help with info and parts in this build, I would be WAY off without their advice! I especially need to thank you Billy Nees for your inspiration and guidance. Without it I doubt I would have ever seriously tackled this project. Our season opens in June and I can't wait for the payoff!

Billy Nees · 04-30-2013, 06:57 PM

Quote:

Originally Posted by iraceitall

I would like to thank Tony Massari and Bob Shaw for all of their help with info and parts in this build, I would be WAY off without their advice!

Hey, with those two involved you're probably going to have to figure out how to slow it down to keep from getting HP!

Michael Colaluca · 05-02-2013, 04:59 AM

I dig it!

randy wilson · 05-02-2013, 07:27 PM

Mike, check your PM's

04-20-2013, 07:08 PM	#1
Joe Toller Senior Member Join Date: Jan 2009 Location: Lewistown, Montana Posts: 550 Likes: 78 Liked 4 Times in 4 Posts	Re: Project Junkyard Dog Well I got a little done today before Mother Nature revolted, the engine compartment is ready for the pressure washer and some rattle can flat black. I threw in a couple newer pics, how about that patina? I kinda wanna keep it... I also made a run to the wrecking yard, and scored a couple pieces I need, which lead to my cheap tips of the day: Need a high output coil? Check out a TFI coil on a fuel injected 5.0 Ford. They're 40,000 volts and fairly compact. I got one for $5 Need a cheap GM mini starter? Try a 94-98 GM pickup 350, 96-98 S-10 or Blazer 4.3, or 97-98 Astro. Compact, gear-reduction, and in my case, $10! I also threw in a pic of my 95 Cougar electric fan, fits a GM radiator perfectly. Attached Thumbnails

04-20-2013, 07:17 PM	#2
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,494 Likes: 3,595 Liked 7,726 Times in 1,739 Posts	Re: Project Junkyard Dog Good Buzzard! __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K

04-30-2013, 10:01 AM	#3
Joe Toller Senior Member Join Date: Jan 2009 Location: Lewistown, Montana Posts: 550 Likes: 78 Liked 4 Times in 4 Posts	Re: Project Junkyard Dog Well, the Dog is plumbed and wired, suspension is all done, and the short block is awaiting a cam (HUGE thanks to Bob Shaw). Heads are almost ready to pick up too. I went through the th350 with a new seal kit, filter, and B&M shift kit. When the motor goes in I will update next. Last edited by Joe Toller; 04-30-2013 at 04:05 PM. Reason: crisis averted!

04-30-2013, 04:02 PM	#4
Joe Toller Senior Member Join Date: Jan 2009 Location: Lewistown, Montana Posts: 550 Likes: 78 Liked 4 Times in 4 Posts	Re: Project Junkyard Dog I would like to thank Tony Massari and Bob Shaw for all of their help with info and parts in this build, I would be WAY off without their advice! I especially need to thank you Billy Nees for your inspiration and guidance. Without it I doubt I would have ever seriously tackled this project. Our season opens in June and I can't wait for the payoff!

05-02-2013, 04:59 AM	#6
Michael Colaluca Junior Member Join Date: Aug 2012 Posts: 81 Likes: 0 Liked 0 Times in 0 Posts	Re: Project Junkyard Dog I dig it!

05-02-2013, 07:27 PM	#7
randy wilson Senior Member Join Date: Jan 2007 Location: N/A Posts: 882 Likes: 0 Liked 22 Times in 22 Posts	Re: Project Junkyard Dog Mike, check your PM's __________________ don,t have one