Project Junkyard Dog

Joe Toller · 03-23-2013, 10:30 AM

Update: While I await my turbo and exhaust manifolds from the powdercoater (free from a buddy), I have started to clean the interior out. The seats are icky, but I'm torn between using a pair of aftermarket buckets up front, and putting in a 4pt bar and eliminating the back seat, even though it's a full frame car and it probably wouldn't help much at the power I'm making. Either that, or I need to reupholster or find replacements for my stock seats...

What the hell was I thinking?! nevermind, I'll rob a better set from another sedanin the wrecking yard!

Derailed by snow again this week though, so we'll try again next weekend!

Joe Toller · 03-23-2013, 12:24 PM

If I don't spend another dime on this car, I am at $1230 in parts/car. Of course, the paint still looks terrible, and the interior stinks. It's also on stock ralleys, with some wal-mart 195/75R15 front radials. I also need to do the screws to the rear bushings, and I did spring for a new pair of rear stock replacement shocks.

Another cheapie tip: want to upgrade your HEI, but you have an oddball car they don't offer one cheap for? Buy a cheapier performance one off ebay ($40) and raid the coil, module, and advance from it. I used a non-turbo HEI from a 79 V6 and a cheapie HEI to make my hi-po one.

I will post pics soon.

Phillip marvetz · 03-23-2013, 01:32 PM

If you want to save $$$ on the paint check out your local hardware store and look for some rustoleum in the quart sized cans. I think I paid less than $10 per quart. 2 would probably be enough if you use a dark color. I thinned it about 30% and used a cheap HVLP gun.

Joe Toller · 03-23-2013, 02:00 PM

Thanks for the idea! I'll look around today!

Joe Toller · 03-24-2013, 10:37 AM

Well, didn't work on the car, but I scored a front and rear seat from an 84 Lesabre 4dr in good shape for $20, and a gallon of silver paint from Ace that was dented, which was donated.

Next weekend, pics.

Billy Nees · 03-24-2013, 10:48 AM

One of NHRAs quirky rules is that you can't use a 4 door seat in a 2 door car! It has to be a split seat.

Joe Toller · 03-24-2013, 10:58 AM

Crap! I'll use the front seat to rebuild the foam in mine I guess?

03-23-2013, 10:30 AM	#1
Joe Toller Senior Member Join Date: Jan 2009 Location: Lewistown, Montana Posts: 550 Likes: 78 Liked 4 Times in 4 Posts	Re: Project Junkyard Dog Update: While I await my turbo and exhaust manifolds from the powdercoater (free from a buddy), I have started to clean the interior out. The seats are icky, but I'm torn between using a pair of aftermarket buckets up front, and putting in a 4pt bar and eliminating the back seat, even though it's a full frame car and it probably wouldn't help much at the power I'm making. Either that, or I need to reupholster or find replacements for my stock seats... What the hell was I thinking?! nevermind, I'll rob a better set from another sedanin the wrecking yard! Derailed by snow again this week though, so we'll try again next weekend! Last edited by Joe Toller; 03-23-2013 at 12:31 PM. Reason: dumbass idea

03-23-2013, 12:24 PM	#2
Joe Toller Senior Member Join Date: Jan 2009 Location: Lewistown, Montana Posts: 550 Likes: 78 Liked 4 Times in 4 Posts	Re: Project Junkyard Dog If I don't spend another dime on this car, I am at $1230 in parts/car. Of course, the paint still looks terrible, and the interior stinks. It's also on stock ralleys, with some wal-mart 195/75R15 front radials. I also need to do the screws to the rear bushings, and I did spring for a new pair of rear stock replacement shocks. Another cheapie tip: want to upgrade your HEI, but you have an oddball car they don't offer one cheap for? Buy a cheapier performance one off ebay ($40) and raid the coil, module, and advance from it. I used a non-turbo HEI from a 79 V6 and a cheapie HEI to make my hi-po one. I will post pics soon. Last edited by Joe Toller; 03-23-2013 at 12:49 PM.

03-23-2013, 01:32 PM	#3
Phillip marvetz Senior Member Join Date: Oct 2008 Location: Lynden ,WA Posts: 820 Likes: 0 Liked 3 Times in 3 Posts	Re: Project Junkyard Dog If you want to save $$$ on the paint check out your local hardware store and look for some rustoleum in the quart sized cans. I think I paid less than $10 per quart. 2 would probably be enough if you use a dark color. I thinned it about 30% and used a cheap HVLP gun. __________________ 2009 V/SA Record Holder

03-23-2013, 02:00 PM	#4
Joe Toller Senior Member Join Date: Jan 2009 Location: Lewistown, Montana Posts: 550 Likes: 78 Liked 4 Times in 4 Posts	Re: Project Junkyard Dog Thanks for the idea! I'll look around today!

03-24-2013, 10:37 AM	#5
Joe Toller Senior Member Join Date: Jan 2009 Location: Lewistown, Montana Posts: 550 Likes: 78 Liked 4 Times in 4 Posts	Re: Project Junkyard Dog Well, didn't work on the car, but I scored a front and rear seat from an 84 Lesabre 4dr in good shape for $20, and a gallon of silver paint from Ace that was dented, which was donated. Next weekend, pics.

03-24-2013, 10:48 AM	#6
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,493 Likes: 3,595 Liked 7,716 Times in 1,738 Posts	Re: Project Junkyard Dog One of NHRAs quirky rules is that you can't use a 4 door seat in a 2 door car! It has to be a split seat. __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K

03-24-2013, 10:58 AM	#7
Joe Toller Senior Member Join Date: Jan 2009 Location: Lewistown, Montana Posts: 550 Likes: 78 Liked 4 Times in 4 Posts	Re: Project Junkyard Dog Crap! I'll use the front seat to rebuild the foam in mine I guess?