79 Malibu stock suspension build

[jims5600]

Very nice work Todd

[Wade Mahaffey]

If you did the work yourself......be very proud! It's a very nicely done car!

Wade Mahaffey

[Todd Geisler]

Thanks guys. I did all the fabrication, welding, sheetmetal work, wiring, plumbing and assembly. The only things I didn't do are the chassis/cage powder coating, body/paint and the custom carpet.

Danny, the intake was a Brodix 2017 that matches the head Hunter MC heads. The carb used to be a Pro Systems 1300XE when it was run on C-15, now have an APD 1250 calibrated for Q16.

Right now the engine is at BES where Tony Bischoff and his crew are making some HP upgrades along with freshening. Should be back in a couple more weeks. In the past I have assembled all my own engines, but this time around we did some custom stuff to where I felt it wise to have Tony do the final mockup and assembly.

[Todd Geisler]

Couple quick videos.

This one is prior to the rebuild.



In car Go Pro video first race after the rebuild. Slug out of the hole with a ton of power taken out.



Test session after having the converter tweaked. Getting after it much better, but still prior to the Q16 carb/fuel swap.

[nickh]

Todd beautiful work

How many passes out of those 275's before you have to put new ones on? Are you rotating tires left to right?

[Todd Geisler]

Originally Posted by nickh

Todd beautiful work

How many passes out of those 275's before you have to put new ones on? Are you rotating tires left to right?

Thank you.

This set of tires had 40 runs on them when last season ended. I might use them for the first testing of this season and put a fresh set on for the first race.

I do not swap sides as the tread slots make the tire directional.

Some of these small tire higher hp cars only get say 10-12 runs on a 10.5 x 28 stiff slick. I know some racers on the old Mickey D/R that get less than 15 runs. I'm running the new 3754X Pro tire. So far very impressed with not only performance & consistency, but tire life as well.

[nickh]

that is impressive, we ran some outlaw 10.5 down here and on the older technology tires we got 15 passes max out of them (side wall was gone).

[Broadbent Bros Racing]

That is one clean looking Malibu. Very nice work.

[Geerhead55]

Originally Posted by Todd Geisler

Thanks guys. I did all the fabrication, welding, sheetmetal work, wiring, plumbing and assembly. The only things I didn't do are the chassis/cage powder coating, body/paint and the custom carpet.

Danny, the intake was a Brodix 2017 that matches the head Hunter MC heads. The carb used to be a Pro Systems 1300XE when it was run on C-15, now have an APD 1250 calibrated for Q16.

Right now the engine is at BES where Tony Bischoff and his crew are making some HP upgrades along with freshening. Should be back in a couple more weeks. In the past I have assembled all my own engines, but this time around we did some custom stuff to where I felt it wise to have Tony do the final mockup and assembly.

Thanks for the info,, Todd. Thats a cool looking piece,, take care.
Danny Durham

[Todd Geisler]

Originally Posted by Geerhead55

Thanks for the info,, Todd. Thats a cool looking piece,, take care.
Danny Durham

Your welcome and thank you Danny.