Cylinder Head Studs - Page 2

Alan Roehrich · 06-26-2007, 12:42 AM

Already done. Waiting on NHRA reply.

RocketBlock · 06-27-2007, 01:17 AM

ZL-1 parts would cross over to all BBC parts except cating numbers, etc. Just as you can use a BBC cast crank and rods from a low HP version on a 427-425 for a reduction in weight, then you should be able to run a ZL-1 specific bolt on a 396-325. Good call. So Ford racers, what head bolts were on the 427 SOHC engines? Been awhile since I had a HEMI apart but I think it had studs also.

06-26-2007, 12:42 AM	#11
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,105 Likes: 1,561 Liked 1,788 Times in 408 Posts	Already done. Waiting on NHRA reply. __________________ Alan Roehrich 212A G/S

06-27-2007, 01:17 AM	#12
RocketBlock Junior Member Join Date: Jan 2003 Posts: 57 Likes: 0 Liked 0 Times in 0 Posts	ZL-1 parts would cross over to all BBC parts except cating numbers, etc. Just as you can use a BBC cast crank and rods from a low HP version on a 427-425 for a reduction in weight, then you should be able to run a ZL-1 specific bolt on a 396-325. Good call. So Ford racers, what head bolts were on the 427 SOHC engines? Been awhile since I had a HEMI apart but I think it had studs also.