2013 Cobra Jet Specs are up

69Cobra · 06-06-2012, 02:31 PM

Quote:

Originally Posted by Andrew Hill

These hp ratings are definitely closer than the 2010-12s were. You have to respect Ford for going in the right direction. The 363 is probably needs the most hp out of all of these, but at least it wasn't 285 like the 2010 version!

I don't know why anyone would build the 363 or 427, though, when the 2010 versions of those motors are rated so much less.

Cubic inch per hp the 363 is pretty close to your combo. 363/330 = 1.1 cu/hp vs. 350/325 = 1.07.

I'm sure it will eventually get hit but it looks like the best combo they've got for '13.

D.Johns · 06-06-2012, 02:54 PM

Jesse,
Did they get the pulley size correct? 3.97 upper? Lower has 8.125 for the Inner? And 7inch for Outer??? Was the drive system reconfigured from the single belt?

D.Johns · 06-06-2012, 04:15 PM

Lol ok they seem to have it fixed now.

5.0 SCJ no longer says SS only and the pulley sizes are 3.75 upper and 8in lower. Had me worried there for a little bit with all this stuff. Maybe I need to also check the valve and other specs just in case! Lol

Andrew Hill · 06-06-2012, 07:52 PM

Quote:

Originally Posted by 69Cobra

Cubic inch per hp the 363 is pretty close to your combo. 363/330 = 1.1 cu/hp vs. 350/325 = 1.07.

I'm sure it will eventually get hit but it looks like the best combo they've got for '13.

I don't have the cylinder heads, intake, cam, compression, or throttle body that 363 does lol.

69Cobra · 06-06-2012, 11:34 PM

Quote:

Originally Posted by Andrew Hill

I don't have the cylinder heads, intake, cam, compression, or throttle body that 363 does lol.

Aaaahhhhh minor details lol

Damn Yankee · 04-26-2013, 07:21 PM

Anyone know of anybody building a 363 ?

06-06-2012, 02:54 PM	#2
D.Johns Member Join Date: Dec 2011 Location: Indiana Posts: 437 Likes: 15 Liked 18 Times in 6 Posts	Re: 2013 Cobra Jet Specs are up Jesse, Did they get the pulley size correct? 3.97 upper? Lower has 8.125 for the Inner? And 7inch for Outer??? Was the drive system reconfigured from the single belt? __________________ 2014 Cobra Jet FS/XX #3345 STK/SS Like us on http://www.facebook.com/pages/Daniel...25886327426822

06-06-2012, 04:15 PM	#3
D.Johns Member Join Date: Dec 2011 Location: Indiana Posts: 437 Likes: 15 Liked 18 Times in 6 Posts	Re: 2013 Cobra Jet Specs are up Lol ok they seem to have it fixed now. 5.0 SCJ no longer says SS only and the pulley sizes are 3.75 upper and 8in lower. Had me worried there for a little bit with all this stuff. Maybe I need to also check the valve and other specs just in case! Lol __________________ 2014 Cobra Jet FS/XX #3345 STK/SS Like us on http://www.facebook.com/pages/Daniel...25886327426822

04-26-2013, 07:21 PM	#6
Damn Yankee Junior Member Join Date: Jul 2007 Posts: 98 Likes: 3 Liked 0 Times in 0 Posts	Re: 2013 Cobra Jet Specs are up Anyone know of anybody building a 363 ?