dropped center link

1320racer · 01-23-2012, 09:02 PM

what was wrong with the driveline angles?

I spent no time trying to get the driveline angles "right".

Used the stock trans mount and crossmember as well the Moroso motor mounts mentioned. IIRC, the engine/trans was 3 1/2" degrees down.

Seemed to work well, running a best of 10.07 n/a and 1.28 60 foot, launched off the footbrake and through a full exhaust with a cast iron oval port headed 11:1 468 backed by a stock gearset turbo400 in my 3880 lb. Chevelle.

01-23-2012, 09:02 PM	#6
1320racer VIP Member Join Date: Nov 2007 Location: New Jersey Posts: 2,628 Likes: 160 Liked 759 Times in 379 Posts	Re: dropped center link what was wrong with the driveline angles? I spent no time trying to get the driveline angles "right". Used the stock trans mount and crossmember as well the Moroso motor mounts mentioned. IIRC, the engine/trans was 3 1/2" degrees down. Seemed to work well, running a best of 10.07 n/a and 1.28 60 foot, launched off the footbrake and through a full exhaust with a cast iron oval port headed 11:1 468 backed by a stock gearset turbo400 in my 3880 lb. Chevelle. Last edited by 1320racer; 01-23-2012 at 09:09 PM.