Amc

Tom Goldman · 12-15-2011, 12:36 PM

Quote:

Originally Posted by Chris1529

The C cars can now run B as well. I think there is an alum head approved for them now too.
Aris Asdourian has his D/SA at Hagerstown this year in Nov on Sunday at the Tri State S/SS race.

He has his SS/C car there on Sat, but broke the engine. He went home and got the stocker and came back Sunday.

Aris's '70 AMX is my former Stocker.
And Scott, If your serious about wanting a SS/C AMX ,I built the chassis and cage on Aris' car and have all the patterns.
Jus bring a wheelbarow full of cash! ...And make sure you have a second one full when you build the engine!! LOL

ps The only good 258 combo is the '77 2bbl ,in just about any body style.

69javman · 12-15-2011, 08:06 PM

Quote:

Originally Posted by Tom Goldman

Aris's '70 AMX is my former Stocker.
And Scott, If your serious about wanting a SS/C AMX ,I built the chassis and cage on Aris' car and have all the patterns.
Jus bring a wheelbarow full of cash! ...And make sure you have a second one full when you build the engine!! LOL

ps The only good 258 combo is the '77 2bbl ,in just about any body style.

What about the '69 258 with the 2bbl Carter WCD in a Javelin?

gmonde · 12-15-2011, 10:32 PM

working on my 70 amx stocker with a 4spd D/S i also ran the 1970 blue rebel machine G/SA for the last two years in D1 ,ran decent for the size of the car ,,but this car should be fun hope to be out mid next season ,,lots of stuff to do gmonde
www.gmondeperformance.com

Tom Goldman · 12-16-2011, 09:43 AM

Quote:

Originally Posted by 69javman

What about the '69 258 with the 2bbl Carter WCD in a Javelin?

258 was not available untill '71 ....I bought one new off the showroom floor and made it an H/MP racer the same week!
The '69 was a 232 and the 2bbl engine is not listed for the Javelin body ,only the 1 bbl version.
Not saying other year 232 , 258's wont run, I've been building them for years for Jeep racers and a Stocker or two, but the only AMC six that has favorable factoring, build specs and a good 2 bbl carb is the '77.

Rod Greene · 12-16-2011, 04:04 PM

Hey Jeff, Rob told me you were putting the AMX back in stock. Now maybe I have incentive to put the Challenger together.

Alex Denysenko · 12-16-2011, 05:22 PM

Aren't some of you Nash racers from Jersey?
Then this may interest you.

http://www.streetlegaltv.com/news/19...r-jersey-shore

Billy Nees · 12-16-2011, 05:52 PM

Quote:

Originally Posted by Alex Denysenko

Aren't some of you Nash racers from Jersey?
Then this may interest you.

http://www.streetlegaltv.com/news/19...r-jersey-shore

That would be Eddie! Being of Spanish descent he would fit right in with that "euro-chic" thing.

Jeff Lee · 12-16-2011, 10:08 PM

Quote:

Originally Posted by Rod Greene

Hey Jeff, Rob told me you were putting the AMX back in stock. Now maybe I have incentive to put the Challenger together.

Hoosiers arrived today. I've always run M/T but decided to try something with more roll-out. These came in at 94.5". That's 2-3" more than I ever had. Sounds like a male enhancement ad....

Now I can get my wheels specified.
I'm working hard to be out by March. Get that six-pack going, I think we could toss a record back and forth! There sure is a lot more in D/S than when I left! I'd love to throw the sticks and autos together. There would be well over a hundred in D.

Jeff Lee · 12-16-2011, 10:14 PM

Anybody going to run the Edelbrock heads for 10HP? Not for now, I'm just going to use my old heads so I can get the dang thing done. Will look at the edelbrocks for some other time.

gmonde · 12-18-2011, 11:18 AM

i would like to get a set to see what the flow numbers are out of the box compaired to what i have on motor now ,plus the weight savings on it ,it might worth the investment
gmonde

12-15-2011, 10:32 PM	#3
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: Amc working on my 70 amx stocker with a 4spd D/S i also ran the 1970 blue rebel machine G/SA for the last two years in D1 ,ran decent for the size of the car ,,but this car should be fun hope to be out mid next season ,,lots of stuff to do gmonde www.gmondeperformance.com Last edited by gmonde; 12-15-2011 at 10:37 PM.

12-16-2011, 04:04 PM	#5
Rod Greene Senior Member Join Date: Mar 2002 Location: TN Posts: 530 Likes: 429 Liked 242 Times in 81 Posts	Re: Amc Hey Jeff, Rob told me you were putting the AMX back in stock. Now maybe I have incentive to put the Challenger together. __________________ Rod Greene Real men shift for them selves. Slowly working on TA Challenger for D,E/S and a 72 Challenger for SS/K, L as if I don't have enough other projects.

12-16-2011, 05:22 PM	#6
Alex Denysenko Senior Member Join Date: Jan 2002 Location: Michigan City IN Posts: 633 Likes: 0 Liked 4 Times in 3 Posts	Re: Amc Aren't some of you Nash racers from Jersey? Then this may interest you. http://www.streetlegaltv.com/news/19...r-jersey-shore __________________ Alex Denysenko NHRA 3038 SS, 3305 STK - IHRA 6 SS, 330A STK Moneymaker Racing LaPorte Indiana 219-861-1214 www.moneymakerracing.net

12-16-2011, 10:14 PM	#9
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Amc Anybody going to run the Edelbrock heads for 10HP? Not for now, I'm just going to use my old heads so I can get the dang thing done. Will look at the edelbrocks for some other time. __________________ Jeff Lee 7494 D/S '70 AMX

12-18-2011, 11:18 AM	#10
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: Amc i would like to get a set to see what the flow numbers are out of the box compaired to what i have on motor now ,plus the weight savings on it ,it might worth the investment gmonde