Cam # help ????

Mike Taylor 3601 · 11-28-2011, 01:52 PM

Have you tried Lunati? If can't find out can have checked on cam doctor. You can measure lobe lift and maybe able to narrow down what lobes they are.
In case you don't know measure lobe both directions and difference is the lobe lift then multiply rocker ratio for lift @ valve.
Mike Taylor 3601

danny waters sr · 11-28-2011, 07:11 PM

Quote:

Originally Posted by Mike Taylor 3601

Have you tried Lunati? If can't find out can have checked on cam doctor. You can measure lobe lift and maybe able to narrow down what lobes they are.
In case you don't know measure lobe both directions and difference is the lobe lift then multiply rocker ratio for lift @ valve.
Mike Taylor 3601

I went on line at Lunati and could not find it.... I was hoping someone had one like it on here and could tell me what it was.....

Thanks for the info

Alan Roehrich · 11-28-2011, 07:29 PM

That appears to be a serial number, you'll probably have to call Lunati, and hope they still have the records.

11-28-2011, 01:52 PM	#1
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,372 Likes: 357 Liked 308 Times in 103 Posts	Re: Cam # help ???? Have you tried Lunati? If can't find out can have checked on cam doctor. You can measure lobe lift and maybe able to narrow down what lobes they are. In case you don't know measure lobe both directions and difference is the lobe lift then multiply rocker ratio for lift @ valve. Mike Taylor 3601

11-28-2011, 07:29 PM	#3
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,118 Likes: 1,576 Liked 1,837 Times in 417 Posts	Re: Cam # help ???? That appears to be a serial number, you'll probably have to call Lunati, and hope they still have the records. __________________ Alan Roehrich 212A G/S