2010 CJ 428 small block info???

Thomas · 09-05-2011, 01:20 PM

Wondering if anyone is running or has information on the M-6007-428CJ Cobra Jet 428 engine. NOT the big block from the 60-70's The engine that was created for the 2010 CJ from a Boss 351 block. I found the blue print specs on the engine. But I still need more info on the valvetrain. I know it's a solid roller and has .589/.589 lift but that's it. Wondering if its a Comp grind since they did the cam for the 427 crate engine.

ALMACK · 09-05-2011, 09:28 PM

Quote:

Originally Posted by Thomas

Wondering if anyone is running or has information on the M-6007-428CJ Cobra Jet 428 engine. NOT the big block from the 60-70's The engine that was created for the 2010 CJ from a Boss 351 block. I found the blue print specs on the engine. But I still need more info on the valvetrain. I know it's a solid roller and has .589/.589 lift but that's it. Wondering if its a Comp grind since they did the cam for the 427 crate engine.

You will have to get a custom ground cam made with the only NHRA spec being the lift. Anything else goes.

As far as I know, Ford never made those crate engines. They made a list of part numbers of stuff in their Racing catalog and submitted the list to NHRA. The complete engines never existed. Each racer has to build their own.

Thomas · 09-07-2011, 01:15 AM

so then I need to go back to the NHRA site and find the NHRA approved pistons, rods, etc. or do I use the printed NHRA specs and go from there "interpreting" the rules not specifically listed?

Alan Roehrich · 09-07-2011, 01:48 AM

Quote:

Originally Posted by Thomas

so then I need to go back to the NHRA site and find the NHRA approved pistons, rods, etc. or do I use the printed NHRA specs and go from there "interpreting" the rules not specifically listed?

Yes, you have to use the NHRA approved products list and the blueprint guide. You're also going to have to find out what rocker arms are on it, I did not see them listed, and since it is a "crate engine" that never actually existed, it is not like you can just look it up in a catalog. If you have ANY question, email tech in Glendora, and get the answer in writing, print it out, and keep it with the car. In fact, you might want to just go ahead and email Glendora, and get a list of what parts are correct and legal for that engine.

jmcarter · 09-07-2011, 05:53 AM

Call Chris...

http://www.holbrookracingengines.com/index.html

RPinoski1 · 09-07-2011, 09:16 PM

Jessel rockers

09-05-2011, 01:20 PM	#1
Thomas Junior Member Join Date: Jun 2011 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts	2010 CJ 428 small block info??? Wondering if anyone is running or has information on the M-6007-428CJ Cobra Jet 428 engine. NOT the big block from the 60-70's The engine that was created for the 2010 CJ from a Boss 351 block. I found the blue print specs on the engine. But I still need more info on the valvetrain. I know it's a solid roller and has .589/.589 lift but that's it. Wondering if its a Comp grind since they did the cam for the 427 crate engine.

09-07-2011, 01:15 AM	#3
Thomas Junior Member Join Date: Jun 2011 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts	Re: 2010 CJ 428 small block info??? so then I need to go back to the NHRA site and find the NHRA approved pistons, rods, etc. or do I use the printed NHRA specs and go from there "interpreting" the rules not specifically listed?

09-07-2011, 05:53 AM	#5
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,301 Likes: 2,394 Liked 3,195 Times in 976 Posts	Re: 2010 CJ 428 small block info??? Call Chris... http://www.holbrookracingengines.com/index.html __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

09-07-2011, 09:16 PM	#6
RPinoski1 Member Join Date: Jan 2002 Location: PLACERVILLE, CA Posts: 182 Likes: 0 Liked 0 Times in 0 Posts	Re: 2010 CJ 428 small block info??? Jessel rockers __________________ "I've never seen a Hearse with a Luggage Rack, You Can't Take it With You" Mike Ness