Dana 60 posi rear

johnjudge · 05-31-2010, 06:06 AM

Dana 60 rear with factory posi unit and 4.10 gear, drum to drum. It measures approx. 54" from each end of the axle tubes. Not sure what it came out of, but doesn't appear to have been narrowed. I was going to put it in a 71 Formula but changed directions. Prefer pick-up...it is HEAVY! $1000

Tom Goldman · 06-01-2010, 03:14 PM

Sounds like a B body rear at that width . It should be 60" overall outside........You might want to pull an axle to see if it's a 35 spline axle . ....'67 & '68's had 28 or 29 splines ,later ones had the 35 spline axles.

05-31-2010, 06:06 AM	#1
johnjudge Junior Member Join Date: May 2010 Posts: 5 Likes: 0 Liked 0 Times in 0 Posts	Dana 60 posi rear Dana 60 rear with factory posi unit and 4.10 gear, drum to drum. It measures approx. 54" from each end of the axle tubes. Not sure what it came out of, but doesn't appear to have been narrowed. I was going to put it in a 71 Formula but changed directions. Prefer pick-up...it is HEAVY! $1000

06-01-2010, 03:14 PM	#2
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 893 Liked 883 Times in 237 Posts	Re: Dana 60 posi rear Sounds like a B body rear at that width . It should be 60" overall outside........You might want to pull an axle to see if it's a 35 spline axle . ....'67 & '68's had 28 or 29 splines ,later ones had the 35 spline axles. __________________ Tom Goldman 1500 SG , 1506 STK