Need Intake for 426 Street Wedge

Ross Family Racing · 12-09-2009, 08:40 AM

Looking for an OE intake and carb for '64 Plymouth Fury with a 426 Street Wedge motor for Stock Eliminator. Anyone out there have one?
Jeff Ross

treessavoy · 12-09-2009, 02:29 PM

Jeff,

Are you looking for the 514 head?

You can find the same head in 413's and 383's of the same era.

I'm looking to build the same combination next year and bought a complete 413 and '65 trans with the 514's. I would be glad to exchange ideas or help as best I can.

I live in FL and will visit Dvorak and see if he has any heads or you can contact him yourself at 352-468-1353.

Good Luck.

JimR

FED 387 · 12-09-2009, 03:56 PM

have a neighbor that is a packrat---has a 3611 Carter carb needs to be rebuilt ---missing a few choke pieces but other than being dirty everything moves freely---interested?? Comp387

jdfpam · 12-09-2009, 10:01 PM

Jeff,
I talked to Al about this a few days ago. What casting number intake do you need? Also, I believe the heads that you need are 516, not 514. If so, I have a few pairs of castings that I would be willing to sell.

Talk to you later,

Jeff Day

treessavoy · 12-10-2009, 01:31 PM

Quote:

Originally Posted by jdfpam

Jeff,
I talked to Al about this a few days ago. What casting number intake do you need? Also, I believe the heads that you need are 516, not 514. If so, I have a few pairs of castings that I would be willing to sell.

Talk to you later,

Jeff Day

Jeff,

You're right on the heads, 516's. my fingers aren't that smart. Also I was told by the NHRA that any Mopar head could be used that had the same valve size and chamber spec's as the 516's could be used ie the 915 with same valve size.

Would the intake and carb be the same as the 413's of '64 and '65? It's not that hard to still find the 413's in junk yards.

JimR

James L Miller · 12-10-2009, 11:24 PM

NHRA lists the 915 and 516 heads as legal for the street wedge in stock.

D = 2406516,2780915, 4532287 SS only

They don't list any intake casting numbers, but for the 383 they show some of the later 69-70 383 intakes as legal. Maybe you can use a 440 AVS intake and be legal? Didn't the early AFBs use a smaller bolt pattern? How would the early carb bolt up to a later intake? Maybe they allow for replacement AFBs like a 9626S or something? Sounds like an e-mail to your tech director may be in order.

GTX JOHN · 12-13-2009, 01:48 AM

I understand you can run the 915 heads if you use the 1.60 exhaust valve. These are way better than 516. To ID them in junkyard look on front machined area behind Alternator and if stamped HP they are 1.75 ..... if not stamped 1.60. If you can run 67-69 Intake for 440 (178) which I don't know.. It is also way better. I have several of each. Racer7411@yahoo.com

340Cuda · 12-13-2009, 01:31 PM

I have a friend that has some tall block single four barrel manifolds and some carbs.

Can you give me the casting numbers and carb numbers that will work for you?

Thanks,
Bill Lamb

John Lang · 12-13-2009, 05:28 PM

FED 387 ! I could use the 3611 carter, even if their are parts missing ! I have lots of parts ! Let me know what he wants for it !
Yes , I still live in Sheboygan ! .......Merry Christmas.......John Lang
I tried to send you a private message ,but could'nt because your box was full !!!

Mopar Steve · 12-13-2009, 08:12 PM

The 426W Single 4 intake pn is 2206000.

12-09-2009, 08:40 AM	#1
Ross Family Racing Member Join Date: Jan 2005 Location: St.Clairsville, Ohio Posts: 459 Likes: 0 Liked 51 Times in 14 Posts	Need Intake for 426 Street Wedge Looking for an OE intake and carb for '64 Plymouth Fury with a 426 Street Wedge motor for Stock Eliminator. Anyone out there have one? Jeff Ross

12-09-2009, 02:29 PM	#2
treessavoy VIP Member Join Date: Feb 2009 Location: Dunnellon,FL Posts: 1,103 Likes: 0 Liked 4 Times in 4 Posts	Re: Need Intake for 426 Street Wedge Jeff, Are you looking for the 514 head? You can find the same head in 413's and 383's of the same era. I'm looking to build the same combination next year and bought a complete 413 and '65 trans with the 514's. I would be glad to exchange ideas or help as best I can. I live in FL and will visit Dvorak and see if he has any heads or you can contact him yourself at 352-468-1353. Good Luck. JimR __________________ Jim Rountree

12-09-2009, 03:56 PM	#3
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,413 Likes: 514 Liked 329 Times in 177 Posts	Re: Need Intake for 426 Street Wedge have a neighbor that is a packrat---has a 3611 Carter carb needs to be rebuilt ---missing a few choke pieces but other than being dirty everything moves freely---interested?? Comp387

12-09-2009, 10:01 PM	#4
jdfpam Member Join Date: Oct 2006 Location: Ohio Posts: 186 Likes: 0 Liked 0 Times in 0 Posts	Re: Need Intake for 426 Street Wedge Jeff, I talked to Al about this a few days ago. What casting number intake do you need? Also, I believe the heads that you need are 516, not 514. If so, I have a few pairs of castings that I would be willing to sell. Talk to you later, Jeff Day

12-10-2009, 11:24 PM	#6
James L Miller Member Join Date: Apr 2005 Posts: 494 Likes: 6 Liked 25 Times in 16 Posts	Re: Need Intake for 426 Street Wedge NHRA lists the 915 and 516 heads as legal for the street wedge in stock. D = 2406516,2780915, 4532287 SS only They don't list any intake casting numbers, but for the 383 they show some of the later 69-70 383 intakes as legal. Maybe you can use a 440 AVS intake and be legal? Didn't the early AFBs use a smaller bolt pattern? How would the early carb bolt up to a later intake? Maybe they allow for replacement AFBs like a 9626S or something? Sounds like an e-mail to your tech director may be in order. __________________ Mopar 2 Ya!

12-13-2009, 01:48 AM	#7
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,726 Likes: 2,775 Liked 2,452 Times in 692 Posts	Re: Need Intake for 426 Street Wedge I understand you can run the 915 heads if you use the 1.60 exhaust valve. These are way better than 516. To ID them in junkyard look on front machined area behind Alternator and if stamped HP they are 1.75 ..... if not stamped 1.60. If you can run 67-69 Intake for 440 (178) which I don't know.. It is also way better. I have several of each. Racer7411@yahoo.com

12-13-2009, 01:31 PM	#8
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,663 Likes: 3,829 Liked 762 Times in 331 Posts	Re: Need Intake for 426 Street Wedge I have a friend that has some tall block single four barrel manifolds and some carbs. Can you give me the casting numbers and carb numbers that will work for you? Thanks, Bill Lamb

12-13-2009, 05:28 PM	#9
John Lang Member Join Date: Oct 2003 Location: Sheboygan Wi Posts: 391 Likes: 0 Liked 6 Times in 2 Posts	Re: Need Intake for 426 Street Wedge FED 387 ! I could use the 3611 carter, even if their are parts missing ! I have lots of parts ! Let me know what he wants for it ! Yes , I still live in Sheboygan ! .......Merry Christmas.......John Lang I tried to send you a private message ,but could'nt because your box was full !!! __________________ John Lang 365 STK, SS

12-13-2009, 08:12 PM	#10
Mopar Steve Junior Member Join Date: Mar 2008 Location: New Castle, PA Posts: 92 Likes: 0 Liked 1 Time in 1 Post	Re: Need Intake for 426 Street Wedge The 426W Single 4 intake pn is 2206000.