|
|
05-11-2021, 05:25 PM
|
#1 |
|
Junior Member
Join Date: Jan 2020
Posts: 27
Likes: 0
Liked 5 Times in 4 Posts
|
Rpm Switch
Going to order a turbo action shifter and air shift solenoid for my S10 ,was wondering if I should keep the m s d RPM activated switch or if I should switch to one of the digital delay rpm switches?
|
|
|
|
05-11-2021, 06:49 PM
|
#2 |
|
VIP Member
Join Date: Dec 2001
Location: phoenix
Posts: 1,486
Likes: 66
Liked 704 Times in 281 Posts
|
Re: Rpm Switch
I had MSD RPM switches and on data logger it was showing up to 100 rpm difference. Changed to dual rpm Biondo box and shift points stay the same
|
|
|
|
|
05-11-2021, 08:53 PM
|
#3 | |
|
Junior Member
Join Date: Jan 2020
Posts: 27
Likes: 0
Liked 5 Times in 4 Posts
|
Re: Rpm Switch
Quote:
|
|
|
|
|
|
05-12-2021, 07:53 AM
|
#4 |
|
Member
Join Date: Jul 2011
Location: Kiefer, Ok.
Posts: 167
Likes: 63
Liked 125 Times in 59 Posts
|
Re: Rpm Switch
I have started using this switch and really like being able to shift on rpm or time.
|
|
|
|
|
05-12-2021, 08:01 AM
|
#5 |
|
VIP Member
Join Date: Mar 2007
Posts: 2,444
Likes: 613
Liked 1,917 Times in 575 Posts
|
Re: Rpm Switch
I use the RPM activated switch from MSD to activate my shifter. I have found them to be very accurate. I only make one shift though.
__________________
Mike Pearson 2485 SS |
|
|
|
|
05-12-2021, 08:52 AM
|
#6 |
|
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
Re: Rpm Switch
The above-listed Elite controller from Digital Delay is a good product. Very accurate.
__________________
Larry Woodfin 471W |
|
|
|
|
05-13-2021, 12:26 PM
|
#7 |
|
Junior Member
Join Date: Jan 2020
Posts: 27
Likes: 0
Liked 5 Times in 4 Posts
|
Re: Rpm Switch
Thanks alot guys,buying that 0ne!
|
|
|
|
|
05-13-2021, 05:15 PM
|
#8 |
|
Junior Member
Join Date: Jan 2020
Posts: 27
Likes: 0
Liked 5 Times in 4 Posts
|
Re: Rpm Switch
Thanks a lot guys I ordered the turbo action reverse pattern air shifter, the air shift solenoid, the digital delay elite switch, time or RPM and a air shift bottle and regulator all from Biondo.. Apparently I got the last reverse pattern Turbo Action Air shifter in the United States, according to Turbo action they didn't even know they had one in stock but they had 1... otherwise mid-july
|
|
|
|
|
05-14-2021, 07:45 AM
|
#9 | |
|
Member
Join Date: Jul 2011
Location: Kiefer, Ok.
Posts: 167
Likes: 63
Liked 125 Times in 59 Posts
|
Re: Rpm Switch
Quote:
You will love that switch. I race a roadster in Footbrake. Last weekend I was racing Footbrake and 6.0 Index. I could switch back and forth from rpm shift in Footbrake to time in 6.0 I have to slow the car way down in 6.0 so I was shifting at .15 and then 7300 in Footbrake. Takes about 5 seconds to change between the two. I trigger the timer to start when the switch sees 4500rpm. You can also trigger it with a push button. Curtis |
|
|
|
|
|
05-15-2021, 11:12 PM
|
#10 |
|
Junior Member
Join Date: Jan 2020
Posts: 27
Likes: 0
Liked 5 Times in 4 Posts
|
Re: Rpm Switch
Thanks for the info!! I was planning on shifting this on time instead of RPM once I get it figured out. I'm glad everyone likes this setup, I'm pretty sure my last shifter problem was due to a MSD RPM switch not shifting twice
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
