|
|
12-09-2019, 06:58 PM
|
#5 |
|
Member
Join Date: Mar 2007
Location: Lake Orion, Michigan
Posts: 337
Likes: 12
Liked 53 Times in 13 Posts
|
Re: Mid plate Stick car
I did not run a mid plate. I had steel tubing about 1/2 inch in diameter, with hiem joints on each end. one end went to the trans cross member and the other end on the clutch can. this was hooked up on the passenger side of the car. it's simple and rock solid. Luke
|
|
|
| Liked |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode