|
|
06-21-2012, 08:04 AM
|
#5 |
|
Junior Member
Join Date: Apr 2008
Posts: 83
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Loose booster in dominator
They need to have booster pins/ booster stake tubes in them. You can get them from BLP, ask for the .160 ID pins, they are not expensive. I use a 1/4 brass punch to drive them in. You really need them, they set the passage diameter to the booster. It will run without them, but not as well.
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode