Is there a west coast rule book for IHRA?

[X-TECH MAN]

Originally Posted by Stocker 2

A '65 Coronet was a all steel car, no lightweight aluminum body parts that are allowed to be replaced with fiberglass. That is unless IHRA is allowing something different.

Oh yeah, I forgot to say LOL

Very true.....the 65 cars are all steel. The 63-64 (Max Wedge) cars are allowed the fiberglass fenders and hoods in replacement for the rare un-obtainium alum. components. It has to be the better quality stuff though. No flimsy "Bracket" car fiberglass.
If its a 63 Max wedge 415 HP car ...it was de-rated to 405 HP about 2 years ago.

[Phillip marvetz]

The 65's had thin gauge steel doors, fenders, hood and front bumper. So I can use the lightweight steel but not fiberglass? Were do I find the hp factors for stock? What is the difference between stock and top stock?

[X-TECH MAN]

Originally Posted by Phillip marvetz

The 65's had thin gauge steel doors, fenders, hood and front bumper. So I can use the lightweight steel but not fiberglass? Were do I find the hp factors for stock? What is the difference between stock and top stock?

Only with a crate Hemi or as a AA/S (7.0 lb break in IHRA) Hemi. The thin steel Hood, fenders, doors and trunk along with the Alum. door hindges and other lite weight components would not be legal as a smal block crate motored car or a regular stocker with a 383 or another combo. The factory hood scoop would only be legal with a Hemi also. There is no Top Stock anymore. They are dropping the top stock class in stock eliminator also as I hear it.

[Phillip marvetz]

Not trying to argue, Just trying to understand what is legal in IHRA. My car in NHRA can run AA/SA, A/SA or B/SA, It has the Nascar Hemi with thin gauge steel and hood scoop. It is currently rated at 440hp with a minumum weight of 3690 in A/SA. It is the long wheelbase with a P/W factor of 8.09.

Where does it fit in IHRA? I heard IHRA uses the original factory HP ratings, So does that mean I'm at 400hp? Fiberglass instead of thin steel? Fiberglass hood scoop?

Why are there only a few racers that have set records in IHRA? Almost all classes are at a minumum..

Can I really run the 71 demon hood scoop on my 71 duster?

Thanks for the help guy's

[X-TECH MAN]

Originally Posted by Phillip marvetz

Not trying to argue, Just trying to understand what is legal in IHRA. My car in NHRA can run AA/SA, A/SA or B/SA, It has the Nascar Hemi with thin gauge steel and hood scoop. It is currently rated at 440hp with a minumum weight of 3690 in A/SA. It is the long wheelbase with a P/W factor of 8.09.

Where does it fit in IHRA? I heard IHRA uses the original factory HP ratings, So does that mean I'm at 400hp? Fiberglass instead of thin steel? Fiberglass hood scoop?

Why are there only a few racers that have set records in IHRA? Almost all classes are at a minumum..

Can I really run the 71 demon hood scoop on my 71 duster?

Thanks for the help guy's

IHRA's AA class is 7.00 lbs per HP. Your car would run A/SA with the single NASCAR 4 barrel at the same factor and weight. You could run AA but could you get to 3080 lbs plus 170 (3250) for the driver? The cross Ram Hemi is de rated to 470 HP in stock for AA and can use the 1 inch shorter wheelbase for a Hemi car. Dan Davorak has a 64 Alum front end Plymouth that fits that class with the X ram but Im not sure if he is able to race yet with his health problems? . No fiberglass in place of the thinner steel. The fiberglass is for 1963-64 Alum front end cars with Max wedge or 64 Hemi cars only. McCormack ran one a few years ago in IHRA. Hood scoop must be steel also on the 65 cars but who even looks ! .
Most records are at min. because there is no incentive to set one. No points and the NHRA guys look down their nose at the IHRA deal anyway. Most think its to much trouble to tear down and as I understand the IHRA has a policy of if you want a record you show up with the engine already torn down (on Fridays I believe)......Its inspected THEN....you put it together, it is then sealed and you run during the time frame allowed for records on Saturday..
You need to call Hank Blakenship (Tech guy) at 276-531-8654 or Danny Waters Sr. (tech guy) and you can email Danny from this forum to be 100% sure of this as its been about 10 years since I have worked for IHRA. Some things have changed in that time. But be aware that they will be in Va. this weekend for the TOC race. The middle of the week next week would be the best time to contact either of those guys. Jim Woods is also a stock S/S tech guy for IHRA and you could contact him from this forum. Check with these guys about the Duster hood scoops.
I hope this helps a little.

[Mike Taylor 3601]

I like the tear down before record run that way if there is something slightly wrong you can correct and make it legal,seal it, then set your record.
Mike Taylor3601

[Phillip marvetz]

It does make sense, but what if you pass tear down but then can't run fast enough to set the record? That would be irritating.