|
|
![]() |
#1 | |
Member
Join Date: Dec 2009
Location: Lebanon, IN
Posts: 483
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
It's absolutely foolish to be running that car down the track and not closely look at the data, actually, you shouldn't even of gone to the track and your tuner should of realized this as a MAJOR PROBLEM. Case and point, similar situation as you, except I didn't talk **** for months building up to this so it didn't attract near as much attention. About 10 years ago I build a turbo'd car, lost a motor. I did the same thing as you and just guessed what went wrong. My datalogging system was screwing up, but I didn't think anything of it as I was convinced I knew what the problem was. Build another motor, and pop it. Same issue. Didn't have data. Built another motor, figured out my data logging issues, and found out that we had a wastegate problem and the car was seriously over boosting (data doesn't lie). Something that was so simple cost tons of money. Could be the same in your circumstances as well. You have the "technology" so you say, use it. Your tuner should know better than to send a car down the track without knowing 100% sure that the datalogging system is working. |
|
![]() |
![]() |
![]() |
#2 | |
VIP Member
Join Date: Sep 2009
Location: Barberton Ohio
Posts: 1,114
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
We knew the issues, we knew the risks we knew the reward, we played our cards, we lost the hand not the game. The old man has a quote he likes to use when he makes a bad bet, or just simply gets beat in a hand "Sometimes you just gotta pay the man" Such is life. Knowledge told is good if it comes from a trusted source, but it is still no replacement for knowlege earned. As you found yourself, well get there, it is what it is and it will be handled, Knocking the bearings out, no, plugs clean, det cans good on dyno, aki logged clear and a visual inspection (I pulled the heads ... yes really ) before we tracked....everything was as perfect as could be....and out AFR was fat and timing low, EGTs right in line (those are logged seperate, or I say can and were) Not totally blind, just partway..... |
|
![]() |
![]() |
![]() |
#3 | |
Member
Join Date: Dec 2009
Location: Lebanon, IN
Posts: 483
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
![]() And as far as your other choices, hey, it's your money and your car. It's just going to be hard for you to back up all the **** you talked if you keep making some of these decisions. Last edited by boostedf22c; 03-06-2010 at 09:45 PM. |
|
![]() |
![]() |
![]() |
#4 | |
VIP Member
Join Date: Dec 2001
Location: Richmond Hill, Georgia
Posts: 2,003
Likes: 0
Liked 1 Time in 1 Post
|
![]() Quote:
I would add fuel to lower egt's. And my turbo cars all went up the track without a datalogger. The only way I could tune the car was with the adjustable fuel regulater And the only data I got was from the EGT gauge. No wideband or anything else, but somehow or other I managed. Ronnie Sox, Bill Jenkins, And Don Nickolson seemed to get by without data loggers for a number of years New cars go through a learning curve. As I mentioned in an earlier post I couldn't get past the starting line 2 weeks ago. A lot can go on in 11 runs as shown on DRC. This was their first time out with a completely new car, they will get it right it just takes time
__________________
Art Leong 2095 SS |
|
![]() |
![]() |
![]() |
#5 | |
Member
Join Date: Dec 2009
Location: Lebanon, IN
Posts: 483
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
You also didn't have the internet where everyone is in everyones business to see how many problems people are really having...haha. I'm sure tons of people were blowing stuff up learning. I understand the learning curve of a new car. Believe me. And retarded timing = Higher EGT's. Regardless of A/F |
|
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Sep 2009
Location: Barberton Ohio
Posts: 1,114
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I NEVER said Retarded timing, NEVER, I said low, maybe it was a communication lapse you thinking I meant something I didnt.
These motors are just about PERFECT at 20.5-21 degrees total timing at WOT, period, just about anyone out there who knows these will tell you that , we were at 19 on 1 run 20 on another, thats what I mean we werent throwing 24 degrees at it, these heads have a stupid amount of flame travel. 20.5-21 seems to be the "Magic Number" Low is "relative" I guess. |
![]() |
![]() |
![]() |
#7 | |
Member
Join Date: Dec 2009
Location: Lebanon, IN
Posts: 483
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#8 | |
VIP Member
Join Date: Dec 2001
Location: Richmond Hill, Georgia
Posts: 2,003
Likes: 0
Liked 1 Time in 1 Post
|
![]() Quote:
__________________
Art Leong 2095 SS |
|
![]() |
![]() |
![]() |
#9 | |
VIP Member
Join Date: Dec 2001
Location: Richmond Hill, Georgia
Posts: 2,003
Likes: 0
Liked 1 Time in 1 Post
|
![]() Quote:
You are new here and don't know peoples backgrounds or what they run or have ran. My turbo dodges must have had some secret squirels firing the fuel injectors. Or was that EFI? I ran turbo stockers from the mid 90's till 2002 But I couldn't make them run any faster than 2 seconds under the index. I'm sure with some knowlege they should have run 5 seconds under. PS those fuel injection firing squirels have migrated to my Neon
__________________
Art Leong 2095 SS Last edited by art leong; 03-07-2010 at 12:37 AM. |
|
![]() |
![]() |
![]() |
#10 |
VIP Member
Join Date: Dec 2001
Location: Richmond Hill, Georgia
Posts: 2,003
Likes: 0
Liked 1 Time in 1 Post
|
![]()
One message for all the world champion typists.
These guys have had the car to the track ONCE, They had some bad breaks. I believe before we all tell them everything they did wrong. We should allow them some time. Dooze and his Dad can now post in the section reserved for actual racers.
__________________
Art Leong 2095 SS |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|