Mopar Engines, Heads,Cranks etc.

[GTX JOHN]

The heads I have were 74cc with a very flat valve. Your combo is 66cc as recall and will require 025-040 more cut off to make them right for early car. You can check mopar heads by measuring square block should be .990 to 1.00 if never cut.

[moparman67]

from what i seen on nhra blueprint spec the head cc should be 74.5 for 426 street wedge. with 915 head. hope you may have unmilled pair. al.

[moparman67]

Originally Posted by GTX JOHN

The heads I have were 74cc with a very flat valve. Your combo is 66cc as recall and will require 025-040 more cut off to make them right for early car. You can check mopar heads by measuring square block should be .990 to 1.00 if never cut.

your 915 heads are 74 cc with flat valve , i should be able to make work. would like to set up purchase. please e-mail me at al@rossautoservices.com thnks al.

[GTX JOHN]

Just stumbled over Virgin pair of 915 Heads.....Never Milled Surfaced or molested in any way....stored 40 years. You can have these same price as other set if that would work better for you. Probably will be 78 to 80cc's as untouched.. I can take them today and get them maged Hot tanked and
inspected by my head guy. Will be in Tucson Div. and Vegas Nat'l or can ship.

RACER7411@yahoo.com John Irving

I still have most of my other stuff for sale!

I need 308 or 576 Small block heads....Will pay double or triple what I sold all mine for naturally.