Mopar Engines, Heads,Cranks etc.
 

I have 50 mopar engines (340,440,400,383,413,318). 100 sets of selected mopar heads stored for 30years (915,587,905,596,051,302,894,452,346) Most $125.pr Cranks $85. Going to Denver, Sonoma,Vegas,Pomona 702 563-9255

Re: Mopar Engines, Heads,Cranks etc.
 

John,

I sent you a PM about your parts.

Jim R

Re: Mopar Engines, Heads,Cranks etc.
 

you dont happen to have any headers for 340 70 duster with 1-3/4 primaries do you?

Re: Mopar Engines, Heads,Cranks etc.
 

i know your add was from some time ago, but do you have bib block 915 heads. and if so what condition and how much. :)thanks al.

Re: Mopar Engines, Heads,Cranks etc.
 

Nice set of '67 915...Hot tanked, milled about 050, new Bronze Wall guides 3 Angle valve job $375. Great for Stock, Hooker Super Comps stock for A Body $195. nice shape Another pair off my 10 Sec. Stocker Adj. Primaries Trick Merged Collector Coated $375. Racer7411@yahoo.com Can bring for inspection to any western race ... prices Firm.:)

Re: Mopar Engines, Heads,Cranks etc.
 

would prefer bare heads not milled . :)

Re: Mopar Engines, Heads,Cranks etc.
 

The heads I have were 74cc with a very flat valve. Your combo is 66cc as recall and will require 025-040 more cut off to make them right for early car. You can check mopar heads by measuring square block should be .990 to 1.00 if never cut. :)

Re: Mopar Engines, Heads,Cranks etc.
 

from what i seen on nhra blueprint spec the head cc should be 74.5 for 426 street wedge.:) with 915 head. hope you may have unmilled pair. al.

Re: Mopar Engines, Heads,Cranks etc.
 

your 915 heads are 74 cc with flat valve , i should be able to make work. would like to set up purchase. please e-mail me at al@rossautoservices.com thnks al.:)

Re: Mopar Engines, Heads,Cranks etc.
 

Just stumbled over Virgin pair of 915 Heads.....Never Milled Surfaced or molested in any way....stored 40 years. You can have these same price as other set if that would work better for you. Probably will be 78 to 80cc's as untouched.. I can take them today and get them maged Hot tanked and
inspected by my head guy. Will be in Tucson Div. and Vegas Nat'l or can ship.

RACER7411@yahoo.com John Irving

I still have most of my other stuff for sale!

I need 308 or 576 Small block heads....Will pay double or triple what I sold all mine for naturally.