Making Aluminum Heads Legal for all SuperStockers

69ss/rs · 10-07-2009, 06:01 PM

Mark Callanan, let's not get dumb.Nobody is saying get away from the basic combination. I don't know if you own a SuperStocker, but with us being able to port and polish intake,exhaust ports, along with the combustion chambers what is the difference than the material the head is made from? Like I said before, sink close to 7500.00 into a good set of iron heads and see what it cost to fix it if one or both get hurt as compared to aluminum. I didn't say change carb,compression or any of the original combo. The aluminum heads usually come with the mods that we pay so much to the Head guys to perform.

10-07-2009, 06:01 PM	#18
69ss/rs Junior Member Join Date: Feb 2009 Posts: 82 Likes: 0 Liked 0 Times in 0 Posts	Re: Making Aluminum Heads Legal for all SuperStockers Mark Callanan, let's not get dumb.Nobody is saying get away from the basic combination. I don't know if you own a SuperStocker, but with us being able to port and polish intake,exhaust ports, along with the combustion chambers what is the difference than the material the head is made from? Like I said before, sink close to 7500.00 into a good set of iron heads and see what it cost to fix it if one or both get hurt as compared to aluminum. I didn't say change carb,compression or any of the original combo. The aluminum heads usually come with the mods that we pay so much to the Head guys to perform.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode