|
![]() |
#1 |
Junior Member
Join Date: Dec 2011
Location: Greenville, NC
Posts: 18
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
How is the best way to set throttle stop rpm? Do you just simply activate the TS and open the throttle wide open with it in park and set it like that or does it have to be under a load?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2007
Location: Fayetteville Ohio
Posts: 656
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Biondo Racing has all the info you'll need to set the stop...
I'd do the link thing but don't know how ....But it's at the top of the page. Last edited by Bob Verwold; 12-20-2011 at 12:18 PM. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Mar 2009
Location: Woodinville, WA
Posts: 401
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I needs to be under load. Two ways to do it: try it on the track, check your log/recording tach, and adjust from there is the most accurate.
Or the other way. Up on stands, switch your box from linkage/undercarb to the opposite setting, press the TB button and nail it. That will put you on the stop and on the TB, check it, adjust, repeat. Just don't forget to set your box back to the correct setting, or you run will be a disaster...
__________________
Chris Williams 6304 SC, TD, ET |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2007
Posts: 557
Likes: 6
Liked 13 Times in 3 Posts
|
![]()
Or the other way. Up on stands, switch your box from linkage/undercarb to the opposite setting, press the TB button and nail it. That will put you on the stop and on the TB, check it, adjust, repeat. Just don't forget to set your box back to the correct setting, or you run will be a disaster...[/QUOTE]
You forgot to tell him to have it in low gear when he presses the trans brake button Chuck |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Dec 2011
Location: Greenville, NC
Posts: 18
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Thanks guys......i figured it had to be under load but wanted to make sure.
|
![]() |
![]() |
![]() |
#6 | |
Member
Join Date: Mar 2009
Location: Woodinville, WA
Posts: 401
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
Of course he'd just be spinning in reverse ![]()
__________________
Chris Williams 6304 SC, TD, ET |
|
![]() |
![]() |
![]() |
|
|