Setting Throttle stop RPM?
 

How is the best way to set throttle stop rpm? Do you just simply activate the TS and open the throttle wide open with it in park and set it like that or does it have to be under a load?

Re: Setting Throttle stop RPM?
 

Biondo Racing has all the info you'll need to set the stop...

I'd do the link thing but don't know how ....But it's at the top of the page.

Re: Setting Throttle stop RPM?
 

I needs to be under load. Two ways to do it: try it on the track, check your log/recording tach, and adjust from there is the most accurate.

Or the other way. Up on stands, switch your box from linkage/undercarb to the opposite setting, press the TB button and nail it. That will put you on the stop and on the TB, check it, adjust, repeat. Just don't forget to set your box back to the correct setting, or you run will be a disaster...

Re: Setting Throttle stop RPM?
 

Or the other way. Up on stands, switch your box from linkage/undercarb to the opposite setting, press the TB button and nail it. That will put you on the stop and on the TB, check it, adjust, repeat. Just don't forget to set your box back to the correct setting, or you run will be a disaster...[/QUOTE]

You forgot to tell him to have it in low gear when he presses the trans brake button
Chuck

Re: Setting Throttle stop RPM?
 

Thanks guys......i figured it had to be under load but wanted to make sure.

Re: Setting Throttle stop RPM?
 

Oops! I do it enough that I forgot that step. Thanks!

Of course he'd just be spinning in reverse :)