CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Park safety switch wiring (https://classracer.com/classforum/showthread.php?t=53408)

Slickfoot 06-04-2014 05:33 PM

Park safety switch wiring
 
I am changing my 89 fox over to a C4 from a 5 speed. I'm down to wiring the park safety switch. I thought I would use the wiring from the clutch interlock, after unpluging the conneter I see that it has 3 wires all blue with a red strip and just two terminals in the plug. What going on here? and what's all the outhers in the 2nd plug on the clutch? Help!
thanks
slickfoot 3955

partsbob67 06-04-2014 08:17 PM

Re: Park safety switch wiring
 
mine is an automatic car. the connector under the dash has a jumper plug from the factory that just loops from one wire to the other. perfect spot to wire in your safety switch. not sure where the other wires go or what they're for.

George Wright 06-04-2014 10:00 PM

Re: Park safety switch wiring
 
One switch allows you to engage the starter when the clutch is pushed all the way to the floor. the other switch engages just as you begin to push the clutch, it shuts off the cruise control.


All times are GMT -4. The time now is 02:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.