Fox body mustang rear spring?
Wondering what most guys are using for a rear coil spring in a fox body mustang stocker with a 30x9 radial?
|
Re: Fox body mustang rear spring?
Moroso or Laurel Mountain.
|
Re: Fox body mustang rear spring?
My 85 is a carbed stick car, with bias ply slicks, but I am just using factory V8 GT rear springs, with Air Lift bags inside.I tried the Morosos, but they seemed too weak, at least with the stick. .
|
Re: Fox body mustang rear spring?
I used the ones from steeda. worked very well.
|
Re: Fox body mustang rear spring?
I had the moroso rear springs, car was way too low, 95 gt moog springs might bewhat you want...I think
|
Re: Fox body mustang rear spring?
I have eibach drag launch with an air bag in the right rear. They work well but will only fit a 28 in tire
|
Re: Fox body mustang rear spring?
I ran stock, uncut GT rear springs in mine.
|
Re: Fox body mustang rear spring?
Lotsa people using stock v8 rear springs with an air bag. FOMOCO brand not aftermarket replacements. Cut one coil out to set the ride height if you want it a little lower and you are all set.
|
Re: Fox body mustang rear spring?
Good shocks is the key, the factory GT springs work. AFCO double adj. No air bags.
Sean |
Re: Fox body mustang rear spring?
I use the 1988 GT/Hatch progressive spring. Generally get about 4 years out of them before they get weak thats running it at 3400 lbs, and will knock the rear bumper off if it didnt have wheelie bars.
|
| All times are GMT -4. The time now is 09:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.