Fuel Injected sample valve

Robert Pare Racing · 08-11-2007, 09:13 AM

does anyone use a Jegs style fuel sample valve?. I am concerned about the higher fuel pressure blowing out the o-rings. Thanks.

RPare@CoppermineApplicators.com

Tim Kish · 08-11-2007, 03:28 PM

I'm running the similar style valve from Clark Holroyd at 45 psi with no issues other than fule comes out REAL FAST when your taking a sample at higher pressure.

Oclk Dlux · 08-13-2007, 01:20 PM

I'm running the Aeromotive #15631 sample valve. I like it better than the Jegs because it has a 1/8 fitting on the side for a pressure gauge. I've ran 75# with no problems. It's only "For A Few Dollars More" at Jegs.

Tom Goldman · 08-13-2007, 06:13 PM

Bob, I've used a couple of the Jegs valves on EFI cars with no problems. .... I agree with Oclk,the Aeromotive is a nicer piece for only a few more bucks, and it'semi idiot proof . ,,, Tom

davyjones · 08-19-2007, 12:52 PM

... the jegs valve , jerry bickel valve , ART valves are all manufactured by Clark . I have never had an Aeromotive valve apart so I cant' say were comparing apples to apples here , but the way the top half swivels it would be logical that It also has o-rings in it . When I designed and prototyped the "CLARK" valve I put alot more pressure on it in testing than you will ever see from a gasoline fuel injection setup. I think this new aero valve is bulky and my main dislike is having an alum part that threads into an aluminum part with a pipe thread . Thats why the CLARK valve has a stainless fitting .

08-11-2007, 03:28 PM	#2
Tim Kish Member Join Date: Nov 2003 Location: Kalamazoo, MI Posts: 281 Likes: 2 Liked 11 Times in 4 Posts	Re: Fuel Injected sample valve I'm running the similar style valve from Clark Holroyd at 45 psi with no issues other than fule comes out REAL FAST when your taking a sample at higher pressure. __________________ Tim Kish 3032 SS/GS

08-13-2007, 01:20 PM	#3
Oclk Dlux Junior Member Join Date: Jul 2005 Location: Boise, Id Posts: 56 Likes: 0 Liked 0 Times in 0 Posts	Re: Fuel Injected sample valve I'm running the Aeromotive #15631 sample valve. I like it better than the Jegs because it has a 1/8 fitting on the side for a pressure gauge. I've ran 75# with no problems. It's only "For A Few Dollars More" at Jegs. __________________ Rich Hedden 6011 BF/S

08-13-2007, 06:13 PM	#4
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,438 Likes: 785 Liked 703 Times in 206 Posts	Re: Fuel Injected sample valve Bob, I've used a couple of the Jegs valves on EFI cars with no problems. .... I agree with Oclk,the Aeromotive is a nicer piece for only a few more bucks, and it'semi idiot proof . ,,, Tom __________________ Tom Goldman 1500 SG , 1506 STK

08-19-2007, 12:52 PM	#5
davyjones Junior Member Join Date: Dec 2003 Location: ALTA LOMA , CA Posts: 92 Likes: 0 Liked 1 Time in 1 Post	Re: Fuel Injected sample valve ... the jegs valve , jerry bickel valve , ART valves are all manufactured by Clark . I have never had an Aeromotive valve apart so I cant' say were comparing apples to apples here , but the way the top half swivels it would be logical that It also has o-rings in it . When I designed and prototyped the "CLARK" valve I put alot more pressure on it in testing than you will ever see from a gasoline fuel injection setup. I think this new aero valve is bulky and my main dislike is having an alum part that threads into an aluminum part with a pipe thread . Thats why the CLARK valve has a stainless fitting .

08-11-2007, 09:13 AM	#1
Robert Pare Racing Member Join Date: Aug 2004 Location: Mother Earth Posts: 265 Likes: 0 Liked 2 Times in 1 Post	Fuel Injected sample valve does anyone use a Jegs style fuel sample valve?. I am concerned about the higher fuel pressure blowing out the o-rings. Thanks. RPare@CoppermineApplicators.com __________________ Rapare-Racing.com