396 lifters

philbilly · 10-31-2014, 09:57 AM

I am in need if some good lifters. I am struggling to get companies to answer their phone.
Is there anyone got a good set of tooled lifters for sale the answers their calls??

What companies is there to choose from?
I want a good set that I can possibly switch on camshafts if needed.

Tom Moock · 10-31-2014, 10:41 AM

philbilly, Call PPPC 800-421-9150. Tom

Bill Diehl · 10-31-2014, 11:23 AM

Trend

586-447-0400

If you are trying to call now..alot of folks are heading to sema, wait a week or so

Alan Roehrich · 10-31-2014, 06:20 PM

I use and sell only Trend. Zero complaints or failures so far.

Alex Denysenko · 11-02-2014, 08:14 PM

Quote:

Originally Posted by philbilly

I am in need if some good lifters. I am struggling to get companies to answer their phone.
Is there anyone got a good set of tooled lifters for sale the answers their calls??

What companies is there to choose from?
I want a good set that I can possibly switch on camshafts if needed.

Phil we still have all the same lifters IN STOCK now that you and I spoke about 6 months or longer ago 4 or 5 different flavors
we are on central time and I have many doctors appointments so I am in and out all the time but Beth ToNY or I ALWAYS return phone calls or emails right away. monymkrsslaaol.com

ps Don't use the PM on this site because I don't always have the time or rememer to log in if especially if i'm only browsing

Alex

Robert Simpson · 11-03-2014, 02:46 PM

Quote:

Originally Posted by Alan Roehrich

I use and sell only Trend. Zero complaints or failures so far.

Alan, do you know the p# from Trend for there sbc hyd lifters?

Thanks

Alan Roehrich · 11-03-2014, 09:01 PM

Robert, I don't. I just call and tell them what I need and they ship them. Great people to deal with.

I've said it before, but it bears repeating. Do not, under any circumstances, run a DLC coated lifter against a cast iron cam.

Robert Simpson · 11-04-2014, 07:29 AM

Ok thanks I will call them. But to be clear you can run the trends on a cast iron cam shaft? Example running engine with a Comp or bullet cam, take out shubecks install trends, set and go?

thanks

10-31-2014, 09:57 AM	#1
philbilly Member Join Date: Aug 2011 Location: Demossville,KY Posts: 337 Likes: 0 Liked 0 Times in 0 Posts	396 lifters I am in need if some good lifters. I am struggling to get companies to answer their phone. Is there anyone got a good set of tooled lifters for sale the answers their calls?? What companies is there to choose from? I want a good set that I can possibly switch on camshafts if needed.

10-31-2014, 10:41 AM	#2
Tom Moock Senior Member Join Date: May 2004 Posts: 801 Likes: 1 Liked 10 Times in 6 Posts	Re: 396 lifters philbilly, Call PPPC 800-421-9150. Tom __________________ Tom Moock 5704 STK

10-31-2014, 11:23 AM	#3
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: 396 lifters Trend 586-447-0400 If you are trying to call now..alot of folks are heading to sema, wait a week or so

10-31-2014, 06:20 PM	#4
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,090 Likes: 1,534 Liked 1,758 Times in 398 Posts	Re: 396 lifters I use and sell only Trend. Zero complaints or failures so far. __________________ Alan Roehrich 212A G/S Last edited by Alan Roehrich; 11-02-2014 at 08:31 PM.

11-03-2014, 09:01 PM	#7
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,090 Likes: 1,534 Liked 1,758 Times in 398 Posts	Re: 396 lifters Robert, I don't. I just call and tell them what I need and they ship them. Great people to deal with. I've said it before, but it bears repeating. Do not, under any circumstances, run a DLC coated lifter against a cast iron cam. __________________ Alan Roehrich 212A G/S Last edited by Alan Roehrich; 11-03-2014 at 09:06 PM.

11-04-2014, 07:29 AM	#8
Robert Simpson Senior Member Join Date: Aug 2004 Location: Jacksonville, Florida Posts: 807 Likes: 7 Liked 20 Times in 12 Posts	Re: 396 lifters Ok thanks I will call them. But to be clear you can run the trends on a cast iron cam shaft? Example running engine with a Comp or bullet cam, take out shubecks install trends, set and go? thanks