Metric 200 Trans

joe huestis · 02-24-2014, 09:30 PM

Approximately how much would a metric 200 Trans set up for a small block chevy application run to build for stock elim. if you provide your own core ?

Dave Ribeiro · 02-24-2014, 11:35 PM

Joe,

Depends on who you deal with, I would say $1,400 to 2,500 for a good
one ... That's not a Mclay or Pro-trans , they are twice as much... Check with Jim Woods , I think he had a couple of them with Convertors for$ 2,500 That's a great deal , maybe he will sell just one ??? Good Luck & it's the way to go... Contact me if you need some help picking one....

Alan Roehrich · 02-24-2014, 11:57 PM

Try Thomas Arnett in Kentucky. His son Clay posts here.

HandOverFist · 02-25-2014, 10:22 AM

Quote:

Originally Posted by Alan Roehrich

Try Thomas Arnett in Kentucky. His son Clay posts here.

Yes, Arnett did ours as well. I think he can do one without any trick internals for around $1500 or so...without convertor of course.

Clay Arnett · 02-27-2014, 02:00 PM

Give us a call sometime. 270-338-6325 Price range varies depending on what you want but a 200 can be done very reasonably.

Bobby Lundholm · 02-27-2014, 05:05 PM

Is it possible to have a 350 input shaft in a 200 trans?

Dion Hildebrandt · 02-27-2014, 05:46 PM

Quote:

Originally Posted by Bobby Lundholm

Is it possible to have a 350 input shaft in a 200 trans?

yes, that is what I have

Greg Hill · 02-27-2014, 06:21 PM

Call Thomas Arnett. He does all my stuff (200's), they work great and last, and we're not easy on them. Plus he's a good guy.

Dale Hulquist · 02-27-2014, 06:45 PM

That's a fact Jack, Arnett builds a great 200 metric, I tried to break one for years and couldn't do it, over 300 passes.Dale H

ken robinson · 03-02-2014, 10:32 AM

I like that suport brace . Whats the most popular first gear ratio 2.75 GM factory gear. Dose anyboby make a falward shift valve body or are they all reverse pattern .

02-24-2014, 09:30 PM	#1
joe huestis Senior Member Join Date: May 2006 Location: Youngsville, N.C. Posts: 622 Likes: 280 Liked 403 Times in 112 Posts	Metric 200 Trans Approximately how much would a metric 200 Trans set up for a small block chevy application run to build for stock elim. if you provide your own core ? __________________ Joe Huestis "Annie's Song" Racing U/SA 2724 Youngsville, NC

02-24-2014, 11:35 PM	#2
Dave Ribeiro VIP Member Join Date: Sep 2002 Location: Williamsburg, Va.---USA Posts: 1,827 Likes: 1,612 Liked 56 Times in 27 Posts	Re: Metric 200 Trans Joe, Depends on who you deal with, I would say $1,400 to 2,500 for a good one ... That's not a Mclay or Pro-trans , they are twice as much... Check with Jim Woods , I think he had a couple of them with Convertors for$ 2,500 That's a great deal , maybe he will sell just one ??? Good Luck & it's the way to go... Contact me if you need some help picking one.... __________________ Dave Ribeiro 1033 STK Last edited by Dave Ribeiro; 02-25-2014 at 12:35 AM.

02-24-2014, 11:57 PM	#3
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,095 Likes: 1,542 Liked 1,772 Times in 402 Posts	Re: Metric 200 Trans Try Thomas Arnett in Kentucky. His son Clay posts here. __________________ Alan Roehrich 212A G/S

02-27-2014, 02:00 PM	#5
Clay Arnett Member Join Date: Jul 2002 Location: Hartsville, IN Posts: 128 Likes: 0 Liked 0 Times in 0 Posts	Re: Metric 200 Trans Give us a call sometime. 270-338-6325 Price range varies depending on what you want but a 200 can be done very reasonably.

02-27-2014, 05:05 PM	#6
Bobby Lundholm Member Join Date: Dec 2006 Location: Charlevoix, MI Posts: 449 Likes: 110 Liked 118 Times in 46 Posts	Re: Metric 200 Trans Is it possible to have a 350 input shaft in a 200 trans? __________________ Bobby Lundholm 3516 G/SA

02-27-2014, 06:21 PM	#8
Greg Hill VIP Member Join Date: May 2006 Location: Louisville , KY Posts: 1,995 Likes: 68 Liked 279 Times in 68 Posts	Re: Metric 200 Trans Call Thomas Arnett. He does all my stuff (200's), they work great and last, and we're not easy on them. Plus he's a good guy. __________________ Greg Hill 4171 STK

02-27-2014, 06:45 PM	#9
Dale Hulquist Member Join Date: Jan 2007 Location: Crosby Texas Posts: 439 Likes: 597 Liked 350 Times in 75 Posts	Re: Metric 200 Trans That's a fact Jack, Arnett builds a great 200 metric, I tried to break one for years and couldn't do it, over 300 passes.Dale H

03-02-2014, 10:32 AM	#10
ken robinson Member Join Date: Dec 2001 Location: tomsriver nj Posts: 477 Likes: 72 Liked 213 Times in 85 Posts	Re: Metric 200 Trans I like that suport brace . Whats the most popular first gear ratio 2.75 GM factory gear. Dose anyboby make a falward shift valve body or are they all reverse pattern . Last edited by ken robinson; 03-02-2014 at 10:35 AM.