SB Mopar 60767 Edelbrock head - Question

sugar1366 · 12-08-2013, 09:14 PM

Has anyone done a set of these heads for a 1.88 valve Super Stock combo yet?
Looking for pros+cons and would like to talk to someone who has some experience with them before I buy the castings.

Thanks-
Eddie Bolton

Patric Fox · 12-08-2013, 09:46 PM

Can't help you, I am also looking for info for a Stock class engine. I don't have good cast iron heads, so I thought it would be easier with the Edlebrocks.

DonatoEng · 12-09-2013, 02:16 PM

I'm working on a set of the Magnum versions for a 5.2 / 5.9 Stocker.
Also have a new set of the MP iron Magnum R/T heads on the shelf.

magnumv8 · 12-09-2013, 06:20 PM

What you are looking at is that Edelbrock has the heads set up for their on finished product.....you would need to enlarge the guides for your 3/8 valve stems which wouldn't be too difficult but, the question would be if there is enough valve seat material in the seat insert to get a 1.88" valve properly seated with your competition valve job......I have a set of the 61767 Magnum heads done and the seats that were in the heads had just enough for the factory Magnum 1.92" valve. Edelbrock installs inserts set up for a 2.02" intake valve...........

D L Rambo......Stk 1300

12-08-2013, 09:14 PM	#1
sugar1366 Junior Member Join Date: Nov 2007 Location: Maryland Posts: 92 Likes: 3 Liked 0 Times in 0 Posts	SB Mopar 60767 Edelbrock head - Question Has anyone done a set of these heads for a 1.88 valve Super Stock combo yet? Looking for pros+cons and would like to talk to someone who has some experience with them before I buy the castings. Thanks- Eddie Bolton

12-08-2013, 09:46 PM	#2
Patric Fox Member Join Date: Jul 2007 Location: Pottstown,Pa. Posts: 121 Likes: 24 Liked 11 Times in 8 Posts	Re: SB Mopar 60767 Edelbrock head - Question Can't help you, I am also looking for info for a Stock class engine. I don't have good cast iron heads, so I thought it would be easier with the Edlebrocks.

12-09-2013, 02:16 PM	#3
DonatoEng Member Join Date: Feb 2009 Location: Milford, MI Posts: 147 Likes: 12 Liked 8 Times in 5 Posts	Re: SB Mopar 60767 Edelbrock head - Question I'm working on a set of the Magnum versions for a 5.2 / 5.9 Stocker. Also have a new set of the MP iron Magnum R/T heads on the shelf. __________________ John Donato Stk / SS 3435

12-09-2013, 06:20 PM	#4
magnumv8 Member Join Date: Feb 2009 Location: Coraopolis, Pa. Posts: 172 Likes: 0 Liked 0 Times in 0 Posts	Re: SB Mopar 60767 Edelbrock head - Question What you are looking at is that Edelbrock has the heads set up for their on finished product.....you would need to enlarge the guides for your 3/8 valve stems which wouldn't be too difficult but, the question would be if there is enough valve seat material in the seat insert to get a 1.88" valve properly seated with your competition valve job......I have a set of the 61767 Magnum heads done and the seats that were in the heads had just enough for the factory Magnum 1.92" valve. Edelbrock installs inserts set up for a 2.02" intake valve........... D L Rambo......Stk 1300