Headers

James Jeschke Jr · 01-25-2013, 01:03 PM

I am building a stocker and want to know whos making the best headers these's days.

Thanks

Sean Marconette · 01-25-2013, 01:40 PM

Hello,

More info on your car and engine/trans combo will get more responses from people. There are several very talented people here that fabricate custom headers.

Sean

njk53 · 01-25-2013, 01:40 PM

What kind car and what motor?

James Jeschke Jr · 01-25-2013, 07:17 PM

1984 Camaro 305 Manual

REGGIE WINKLES · 01-25-2013, 07:38 PM

James, I have the same combo you have 84 Camaro 305/Stick. I use Wes Collins in Lincoln, Neb. He does good work with the stainless headers. I choose the Tri-y header and it was worth .12 on my combo. I'm sure there is more, that increase is with the same tune-up as the conventional header I had. The Tri-y likes more fuel. Wes Collins cell # 402-438-0430. Tell him Reggie gave you his number. Hope this helps.

Doug McCue · 01-25-2013, 09:42 PM

Dave Bogner is good too.
http://bognerauto.com/

chassis1 · 01-26-2013, 02:09 AM

Thanks Reggie, glad to help you but we are too busy right now. I am finishing the Comp/SS Firebird with and R07 in it from last year. We are way too busy to do anything for at least 6 months....

Dave Bogner worked here for me when he was in college, he is very talented.

Be more than glad to give advice, but work wise we are over scheduled and booked for most likely the rest of the year....

take care....

Chassis1

james schaechter · 01-26-2013, 08:43 AM

REF in Kingman AZ make great mild steel headers. We have had a couple sets made for our Nova. A friend of ours has had small and bigblock stuff done as well. They are always on price quote, delivered on time and make great power. They fit nice too. Definately worth a call.

James Jeschke Jr · 01-26-2013, 09:27 AM

Thank you all for all the info. Im new to this game and its allways nice to have help.

Thanks again,
Jim

01-25-2013, 01:03 PM	#1
James Jeschke Jr Junior Member Join Date: Jan 2013 Location: Pittsburgh Pa. Posts: 35 Likes: 20 Liked 19 Times in 10 Posts	Headers I am building a stocker and want to know whos making the best headers these's days. Thanks

01-25-2013, 01:40 PM	#2
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 787 Liked 274 Times in 76 Posts	Re: Headers Hello, More info on your car and engine/trans combo will get more responses from people. There are several very talented people here that fabricate custom headers. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

01-25-2013, 01:40 PM	#3
njk53 Senior Member Join Date: Jul 2007 Location: East China, MI Posts: 504 Likes: 0 Liked 0 Times in 0 Posts	Re: Headers What kind car and what motor? __________________ Nelson Kowal Stock 345

01-25-2013, 07:17 PM	#4
James Jeschke Jr Junior Member Join Date: Jan 2013 Location: Pittsburgh Pa. Posts: 35 Likes: 20 Liked 19 Times in 10 Posts	Re: Headers 1984 Camaro 305 Manual

01-25-2013, 07:38 PM	#5
REGGIE WINKLES Member Join Date: Jun 2007 Location: St. Augustine, Fla. Posts: 229 Likes: 560 Liked 39 Times in 9 Posts	Re: Headers James, I have the same combo you have 84 Camaro 305/Stick. I use Wes Collins in Lincoln, Neb. He does good work with the stainless headers. I choose the Tri-y header and it was worth .12 on my combo. I'm sure there is more, that increase is with the same tune-up as the conventional header I had. The Tri-y likes more fuel. Wes Collins cell # 402-438-0430. Tell him Reggie gave you his number. Hope this helps. __________________ Reggie Winkles 2650/Stock

01-25-2013, 09:42 PM	#6
Doug McCue Member Join Date: Jun 2007 Posts: 232 Likes: 7 Liked 13 Times in 2 Posts	Re: Headers Dave Bogner is good too. http://bognerauto.com/

01-26-2013, 02:09 AM	#7
chassis1 Junior Member Join Date: Nov 2003 Location: drag city, ne Posts: 92 Likes: 1 Liked 9 Times in 3 Posts	Re: Headers Thanks Reggie, glad to help you but we are too busy right now. I am finishing the Comp/SS Firebird with and R07 in it from last year. We are way too busy to do anything for at least 6 months.... Dave Bogner worked here for me when he was in college, he is very talented. Be more than glad to give advice, but work wise we are over scheduled and booked for most likely the rest of the year.... take care.... Chassis1

01-26-2013, 08:43 AM	#8
james schaechter VIP Member Join Date: Dec 2004 Location: Cumming GA Posts: 1,985 Likes: 1,277 Liked 1,424 Times in 294 Posts	Re: Headers REF in Kingman AZ make great mild steel headers. We have had a couple sets made for our Nova. A friend of ours has had small and bigblock stuff done as well. They are always on price quote, delivered on time and make great power. They fit nice too. Definately worth a call. __________________ James Schaechter 3163 STK

01-26-2013, 09:27 AM	#9
James Jeschke Jr Junior Member Join Date: Jan 2013 Location: Pittsburgh Pa. Posts: 35 Likes: 20 Liked 19 Times in 10 Posts	Re: Headers Thank you all for all the info. Im new to this game and its allways nice to have help. Thanks again, Jim